|
These hollow drill bits are compatible with Euro standard paper drills. They have an 11mm shank and fit drills with 2" (51mm) stack capacity.
They fit European paper drills by Babs, Citiborma, Concorde, Durselen, Foellmer, Hang, Kobold, Nagel, Nfpe, Marchetti, Mercury, OMM, Pescha, Stago, Uchida, Venus, and more.
Diameter: | 6.5mm |
Shaft Length: | 2" |
Drill Bit Capacity: | 2" |
![]() AccuBind Pro2 Tape Binder $5,495.00 |
![]() Triumph 5210 Cutting Knife $259.00 |
![]() TW-2100 Manual Wire Punch and Bind $459.00 |
![]() HR 3800 38" Roll Laminator $3,949.95 |
![]() 19" Knife Guard $38.00 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x STEPPER DRIVE BD 4VSFR001 | $4,488.18 |
1 x BCS212 Business Card Slitter | $1,998.00 |
1 x WIRE ASSFTY EXCELAM II-355 | $23.44 |
1 x BCS 1000M Business Card Cutter | $119.00 |
1 x 2 Year Worry Free Guarantee (c) | $79.99 |
1 x Pillar | $6.08 |
1 x Timing Belt (60DS3M360)/DC615 | $72.81 |
1 x Polar 112 EL Cutting Knife | $642.00 |
1 x Triumph 3900 Cutting Knife | $228.00 |
1 x 64" Javelin Series 2 Cutter Bar | $814.50 |
1 x Roll Assembly 3 | $413.21 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x 15" Knife Guard | $30.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x CABLE, EF MOTOR IF, 131CM, 10 PIN | $168.61 |
1 x LJ-6 Paper Jogger | $1,265.00 |
1 x Finisher - Upper Entrance Guide - Staple Tray - Genuine Ricoh Part | $20.40 |
1 x DRIVE ROLLER P9-N1330 | $624.88 |
1 x DISCONTINUED -CONTROL PANEL ASSEMBLY | $74.00 |
1 x Belt | $82.38 |
1 x 5/8" type HO-5/8 staples | $10.43 |
1 x 24N Sprocket | $97.93 |
1 x TORQUE WASHER, TUMBLE | $14.67 |
1 x Rosback 250 Bottom Front Cutting Knife | $170.00 |
1 x OD. 9520 FEED ROLLER | $56.12 |
1 x Kolbus HD 150 (10 Hole) Cutting Knife | $330.00 |
1 x Small Menu 3 Mil Matte-Matte Laminating Pouches | $206.50 |