|
These Style A 2" Hollow Drill Bits fit Lassco Spinnit® and Challenge paper drills.
Please note that, although they are designed for a 2" drill, these 1/8" hollow drill bits will drill a maximum of a 1" stack.
Diameter: | 1/8" |
Shaft Length: | 2" |
Drill Bit Capacity: | 1" |
![]() Polar 115 CE Cutting Knife $642.00 |
![]() 12mm Euro Standard Hollow Drill $44.98 |
![]() Seypa PA 92 Cutting Knife $680.00 |
![]() 1/4" Iram / Sterling Standard $33.95 |
![]() Zippy Cutter $9.95 |
1 x WIRE ASSFTY 638000157 | $35.73 |
1 x IDLER GEAR, 13T 20PA | $8.58 |
1 x DRIVE PRESS. ROLLER | $4.48 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x Idler | $15.73 |
1 x DC Solenoid/DF-1000 | $71.82 |
1 x Belt | $82.38 |
1 x TIE SPRING | $42.54 |
1 x Lightweight 6" Wall Mount Literature Holder | $23.50 |
1 x 1-1/2" Loose Leaf Rings | $26.83 |
1 x Miracle LMM 63 Cutting Knife | $336.00 |
1 x SCREW 9001-490 | $22.10 |
1 x RUBBER WHEEL 96V-22070 | $102.69 |
1 x 1" Push-to-Lock Loop Screws | $21.95 |
1 x Main PCB Unit/DP-203 II, DP-205 II | $2,278.27 |
1 x Original Guide | $12.15 |
1 x Frame L | $237.60 |
1 x Proteus Workbench For 104" Javelin Integra | $805.50 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x Foldup 5" Wall Mount Literature Holder | $92.00 |
1 x SteelTraK 65" Utility Cutter | $5,060.00 |
1 x NEEDLE RLLR BEARING 635400051 | $64.70 |
1 x Zippy Cutter | $9.95 |
1 x Micro Switch/DC-645 | $41.63 |
1 x RUBBER WHEEL 96V-22100 | $111.50 |