|
These hollow drill bits fit Martin Yale, Lihit, and Imperial paper drills. They will drill up to a 2" stack of paper.
Diameter: | 9/32" |
Shaft Length: | 2" |
Drill Bit Capacity: | 2" |
CBX-100 Automatic Heavy Duty $5,795.00 |
VersaBind-M Manual Punch and $1,169.00 |
Dahle 550 14-1/8" Rotary Cutter $179.00 |
Baumfolder Pacemaker II 60" Cutter $799.00 |
62361 36" Stand for 40” Sabre $553.50 |
1 x Versalam 1300 Single Sided/Double Sides Roll Laminating Machine | $3,137.40 |
1 x Versalam 2700 27" Single Sided/Double Sided Roll Laminating Machine | $3,319.65 |
1 x 24VDC 1.2A 220V EU | $89.10 |
1 x FP-IVT 3 Spindle Table Top Paper Drill DISCONTINUED | $3,295.00 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x 84" Javelin Integra (60287) | $1,143.00 |
1 x ADJ.SCRW PAPER GUIDE 2215910 | $24.36 |
1 x Diamond 5 Electric Tabletop Corner Rounding Machine | $3,085.00 |
1 x BLADE STRIP ASSY SB | $63.95 |
1 x 13" Knife Guard | $26.00 |
1 x 33 Up Printer Labels | $19.95 |
1 x 14" Knife Guard | $28.00 |
1 x Lassco Spinnit FMMH 3.1 Fully Automatic Hydraulic Three Spindle Paper Drill | $11,250.00 |
1 x KNIFE RETURN SPRING PLATE | $72.27 |
1 x 64" Javelin Integra (60286) | $1,024.00 |
1 x GEAR ASSY BFR & CLUTH 2601087 | $224.83 |
1 x DOWEL PIN, SW ACTUAT | $22.55 |
1 x 104" Javelin Integra (60288) | $1,287.00 |
1 x HOOK-COIL HOLE FTCFT | $74.41 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x 27"x250' 3 mil Digikote Gloss | $96.36 |
1 x 25"x250' 5 mil Digikote Gloss Laminating Film | $194.30 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x SIDE STOP RIGHT | $160.59 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x DISCONTINUED Evolution E2 64" Cutter | $1,534.50 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x Bearing (Collar)/DC-645 | $39.03 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x 1162 HANDLE BLADE | $112.30 |