|
These hollow drill bits fit Lassco Spinnit 1" paper drills. They will drill up to a 1" stack of paper.
For the standard Lassco Spinnit 2" drills, see our 1/4" Challenge/Lassco Drill Bits.
Diameter: | 1/4" |
Shaft Length: | 1" |
Drill Bit Capacity: | 1" |
Camco Big 3 (17") Cutter Knife $154.00 |
3/8" Lassco Spinnit® 1" Hollow $30.49 |
Free Standing Kit for 63" $292.50 |
8-1/2" x 11" Clear Covers 5 mil $14.22 |
5/16" Lawson / Miller HFD / Baum $32.95 |
1 x Minikote 27" Roll Laminator | $1,689.00 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x HS-2000 M Business Card Slitter | $1,195.00 |
1 x ELBOW MALE 1/4 TO 1/8 NPT | $48.65 |
1 x Pawl | $28.63 |
1 x BCS210 Business Card Slitter | $1,685.00 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x BEARING 013-00094 | $63.18 |
1 x Composite Twin Wheel Head for 63" Excalibur Series Gold Head | $139.95 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x PL-1200HP 12 in. High Performance Laminator | $2,895.00 |
1 x Belt | $82.38 |
1 x Bundled Cable Assembly B | $92.15 |
1 x Series 2 Single Cutting Head with Accessories | $436.50 |
1 x HS-2000 A-B Business Card Slitter DISCONTINUED | $2,595.00 |
1 x 60950 Evolution 2 Bench for the 64" Evolution E2 | $666.00 |
1 x SOLENOID VAVVE CPE14-M1BH- | $318.94 |
1 x Replacement Cutting Wheels for 63" Excalibur Series Gold Head | $85.50 |
1 x BCS 1000M Business Card Cutter | $119.00 |
1 x 6 12&20 DOUBLE HING Each | $14.23 |
1 x STRIPPING DEVICE 02572720 | $23.17 |
1 x NIP,8500 | $8,261.20 |
1 x Super Pad Pro Padding Press DISCONTINUED | $699.00 |
1 x 609050057GEAR MOTOR (120V) GIBM-11-6D | $53.52 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x Staple Unit DBM 120 DISCONTINUED | $664.46 |
1 x Sight Line Strips for 63" Excalibur Series Cutters | $58.50 |
1 x Ledco Premier 4 Roll Laminator 25" Roll Laminating Machine | $2,949.00 |
1 x 36" Extended Measuring Arm for the Sabre Series Cutters | $162.00 |
1 x Paper Detection Switch/DF-915, 920, DFC-12 DISCONTINUED | $58.77 |
1 x TOP LT BAR SPRT | $15.58 |
1 x GLUE TNK TMP SAFETY SNSR-E7317 | $64.37 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |