|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
![]() 1/4" Push-to-Lock Loop Screws $19.25 |
![]() MBM/Ideal Trimuph 5550 Cutting $57.49 |
![]() Martin Yale 7000E Cutting Knife $119.00 |
![]() 18" x 250' 3 Mil Low Melt $58.96 |
![]() Excalibur 1000X Utility Cutter $2,466.00 |
1 x MBM/Ideal AP30 Air Purifier | $249.00 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x Velobind System 3 Pro | $4,949.00 |
1 x DISCONTINUED GRAPHIC LCM DISPLAY | $1,499.70 |
1 x IDLER, 32 1/4 | $1,633.02 |
1 x MBM/Ideal AP15 Air Purifier | $189.00 |
1 x FWD/REV SWITCH 14.95 | $529.15 |
1 x Marlon 350E Spiral Coil Binding Machine | $1,929.00 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x 18" x 500' 1.7 Mil Low Melt Laminating Roll Film | $96.72 |
1 x Minipad 4000 Padding Press | $199.00 |
1 x Martin Yale 2600E Cutting Knife | $319.00 |
1 x NEEDLE RLLR BEARING 635400051 | $64.70 |
1 x WELD STKG TRAY | $142.04 |