|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
![]() PB3300 Interchangable Die Wire $4,295.00 |
![]() Proteus Workbench For 144" Javelin $1,143.00 |
![]() Polar 78 Cutting Sticks $59.95 |
![]() Lawson 42" Pacemaker II Cutting $582.00 |
![]() Lawson A 112 (Metric) Cutting $630.00 |
1 x DocuGem R1800 18" Paper Cutter | $1,900.00 |
1 x GLUE TNK TMP SAFETY SNSR-E7317 | $64.37 |
1 x Feed Shaft | $37.42 |
1 x DU BUSHING FLANGE 0808 | $22.55 |
1 x Sensor w/Holding (A82.11.71) | $75.71 |
1 x ROLLER 11J53040 | $53.11 |
1 x 54" (135cm) Safety Straight Edge | $166.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x FEED BELT | $44.36 |
1 x 5/16"" X 3"" CLEVIS PIN | $15.47 |
1 x WASTEBASKET | $96.32 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x CONVEYOR BELT | $36.12 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x MAIN POWER SWITCH-E7303 | $54.24 |
1 x TENSION CONTROL FRONT BLOCK | $143.68 |
1 x CoilPro 2000 ECP+ Coil Binding Machine | $1,481.00 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x Coil Crimper Pliers | $29.99 |
1 x Multi–Finisher 3-in-1 Binding Machine for Comb, Coil & Wire | $549.00 |
1 x REWDR TENSION BOLT 632501775 | $57.56 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Zippy Cutter | $9.95 |
1 x TAPER BUSHNG MARTIN 1610 1-1/2 | $53.66 |
1 x 4705 18-3/4 Inch Manual Paper Cutter | $3,639.00 |
1 x BEARING 013-00094 | $63.18 |
1 x Flat Belt DISCONTINUED | $88.88 |
1 x ARM, REWIND MOUNTING | $583.43 |