|
Replacement cutter knives for the Muller Martini DS 235 paper cutters are manufactured to meet or exceed OEM specifications. Check the specifications for the knife dimensions.
Length: | 20.460 Inches |
Width: | 5.512 Inches |
Thickness: | 0.236 Inches |
No. of Holes: | 14 |
![]() Deko Spring Wobbler $61.95 |
![]() Muller Martini DS 217 (20") $343.00 |
![]() Thermal Glue Pellets for Perfect $279.00 |
![]() Business Card 10 Mil Matte $59.95 |
![]() 18" (45cm) Safety Straight Edge $84.30 |
1 x Stahl 135A Top Right Cutting Knife | $354.00 |
1 x 1/2" Type HO-1/2 staples | $8.33 |
1 x PULLEY GEAR COMBO M-O1601083 | $37.70 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x 6.5mm Euro Standard Hollow Drill Bit | $24.98 |
1 x TURN 4TH ROLLER SHFT | $42.32 |
1 x SCREW 9001-490 | $22.10 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x DRIVE ROLLER ASSY. | $102.88 |
1 x IDLER NIP ROLLER >USE 0750090800 | $164.61 |
1 x 12MM SPINE FRMR-CC912000 | $103.31 |
1 x 9/16" I.D. White Plastic Snap Rings | $13.66 |
1 x Excalibur 3S Utility Cutter | $3,800.00 |
1 x Itoh 115 B Cutting Knife | $1,290.00 |
1 x Plate | $58.77 |
1 x MENU SIZE (3 MIL) RF | $197.23 |
1 x HEATR HOUSING ASY(UP)638200001 | $119.26 |
1 x Rubber Cleaner & Rejuvenator | $26.93 |
1 x DRIVEN NIP ROLER SHAFT DISCONTINUED | $236.75 |
1 x BEARING 5210-031 | $22.10 |
1 x GASKET FLG,FLG.542.00007.05 | $51.14 |
1 x TBD - LFT WASHER 1/2 INTFTL. | $23.68 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Adhesive for Horizon BQ-160 PUR | $69.95 |