|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() Onyx HD6500 Comb, Wire, & Spiral $3,398.00 |
![]() Phoenix 2700-DH Dual Heat $1,405.00 |
![]() Heavy Duty Hand Slot Punch $59.95 |
![]() Textile Blade Holder $85.50 |
![]() Standard 45mm Textile Blades $25.00 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x DISCONTINUED Evolution E2 84" Cutter | $1,674.00 |
1 x DISCONTINUED Evolution E2 144" Cutter | $2,200.50 |
1 x Versalam-2700 EP Roll Laminator | $3,699.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Photo Switch (LS1=LS3=LS4) | $40.26 |
1 x Textile Blade Holder | $85.50 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x Challenge 42TCM Cutting Knife | $480.00 |
1 x Stitch 'N Fold Face Trimmer | $17,299.00 |
1 x SP WLD FLD TBL | $118.76 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x SCREW 9001-490 | $22.10 |
1 x BLANK CHAD DIVERTER | $23.87 |
1 x ROUND MASTER SWITCH 9003390 | $356.80 |
1 x Binding Workstation | $219.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x Count Stationary Roller Std | $35.95 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x Pull down rod 44013 | $245.28 |
1 x MOTOR PULLEY 260417 | $43.59 |
1 x RETARDER BUTTON | $14.25 |
1 x DIN7991 FILISTER HEA | $7.80 |
1 x Electronics Clutch/MS-4000 | $460.65 |
1 x LRG COOLING FAN PRF133 PRFSSR | $150.38 |
1 x FALCON THERMOSTATE BRACKE | $47.09 |
1 x THERMAL CUTOUT W/TERM (JD139) | $83.47 |
1 x EGLE SIDE COVER (L) 633200006 DISCONTINUED | $181.70 |
1 x 1/4" SB-35 Bostitch type staples | $5.99 |
1 x HEAT SWITCH PRS311 PROFFESSOR | $40.17 |