|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
25"x250' 5 mil Digikote Gloss $194.30 |
3/8" SB-35 Bostitch type staples $7.49 |
3-sided Mobile Mount $62.95 |
Onyx 3 in 1 PPS $10,370.00 |
55"x250' 3 mil Digikote Satin $253.04 |
1 x Versalam 1300 Single Sided/Double Sides Roll Laminating Machine | $3,137.40 |
1 x Versalam 2700 27" Single Sided/Double Sided Roll Laminating Machine | $3,319.65 |
1 x 24VDC 1.2A 220V EU | $89.10 |
1 x FP-IVT 3 Spindle Table Top Paper Drill DISCONTINUED | $3,295.00 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x 84" Javelin Integra (60287) | $1,143.00 |
1 x ADJ.SCRW PAPER GUIDE 2215910 | $24.36 |
1 x Diamond 5 Electric Tabletop Corner Rounding Machine | $3,085.00 |
1 x BLADE STRIP ASSY SB | $63.95 |
1 x 13" Knife Guard | $26.00 |
1 x 33 Up Printer Labels | $19.95 |
1 x 14" Knife Guard | $28.00 |
1 x Lassco Spinnit FMMH 3.1 Fully Automatic Hydraulic Three Spindle Paper Drill | $11,250.00 |
1 x KNIFE RETURN SPRING PLATE | $72.27 |
1 x 64" Javelin Integra (60286) | $1,024.00 |
1 x GEAR ASSY BFR & CLUTH 2601087 | $224.83 |
1 x DOWEL PIN, SW ACTUAT | $22.55 |
1 x 104" Javelin Integra (60288) | $1,287.00 |
1 x HOOK-COIL HOLE FTCFT | $74.41 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x 27"x250' 3 mil Digikote Gloss | $96.36 |
1 x 25"x250' 5 mil Digikote Gloss Laminating Film | $194.30 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x SIDE STOP RIGHT | $160.59 |
2 x OLFA 45mm Textile Blades | $300.00 |
1 x DISCONTINUED Evolution E2 64" Cutter | $1,534.50 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x Bearing (Collar)/DC-645 | $39.03 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x 1162 HANDLE BLADE | $112.30 |
1 x SPRING (714XE#24216) | $21.64 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Onyx HD7700 Ultima Punch For Wire, Comb & Spiral Binding | $4,634.00 |
1 x DISCONTINUED Evolution E2 84" Cutter | $1,674.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x Onyx HC8024 24in. Manual Wire Closing Machine | $1,229.00 |
1 x ONYX HC8318 18" Wire Inserter / Closer | $2,475.00 |
1 x Leveling Feet for 660 Cutter. | $23.63 |