|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() 1/2" Lassco Spinnit® 1" Hollow $39.95 |
![]() Baumfolder 80 Cutter Knife $379.00 |
![]() 62361 36" Stand for 40” Sabre $553.50 |
![]() Onyx HD7000 Comb, Wire, & Spiral $3,604.00 |
![]() 12" Rotatrim Rotary Paper Cutter $274.00 |
1 x RETARDER BUTTON | $14.25 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x ADJ.SCRW PAPER GUIDE 2215910 | $24.36 |
1 x FORM TENSION BLOCK | $51.23 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x CombMac-24E Electric Comb Binding Equipment | $1,395.00 |
1 x PBPro 201 Plastic Comb Binding Machine | $299.00 |
1 x KIT, F60 TO STEEL ROLL W/HTR | $11,160.25 |
1 x DRIVE GEAR 125T CLOS | $349.50 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x PBPro 101 Plastic Comb Binding Machine | $99.00 |
1 x Onyx PAL-14 Picks-A-Lift Automated Module | $2,799.00 |
1 x 1/2 BIT, TEFLON, PD12T-2 | $108.12 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x ANTISTATIC BRUSH(Q-CUTTER) | $157.54 |
1 x HEATER WIRE FOR DS2700 | $24.36 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x COUNTER 1745T11 | $567.10 |
1 x HOOD ASSEMBLY EH-3 5720-2 | $2,386.86 |
1 x DETECT SHAFT, IS129020 | $185.65 |
1 x FXD FORCE GAS SPRING 60LB 3.54 | $81.87 |
1 x DRILL BIT 1/8 2IN LONG PD18-2 | $96.88 |
1 x #8X1/2 PH.PH.""B""ZINC | $3.43 |
1 x BLADE CUTTER COATED.(VB) | $456.35 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x TBD - KIT F60+ PWR SPLY UPGRADE | $1,281.19 |
1 x 62351 Stand, Waste Catcher & Roll Feeder Package for 40” Sabre Series 2 | $1,125.00 |
1 x 36" Rotatrim Rotary Paper Cutter | $559.00 |
1 x Main Motor | $715.53 |
1 x ONYX HD8000 Manual Wire Closer | $609.00 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x 62359 Stand, Waste Catcher & Roll Feeder Package for 120” Sabre Series 2 | $1,698.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |