|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() Count Repeat Selector Kit 8 Wheel $65.63 |
Javelin 120" Utility Cutter $0.00 |
![]() PBPro 201E Electric Comb Binding $289.00 |
![]() Binding Workstation $219.00 |
![]() Lassco Spinnit FMMH 3 Fully $9,950.00 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 36" Extended Measuring Arm for the Sabre Series Cutters | $162.00 |
1 x PUSH-BUTTON KNIFE & CLAMP | $71.57 |
1 x ENVELOPE EXCITER | $12.22 |
1 x PULLEY-GEAR COMBO-ON 1611 LIN | $17.92 |
1 x 1/4" Push-to-Lock Loop Screws | $19.25 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Plastic Luggage Strap | $19.95 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x MBM iBooklet Tabletop Booklet Maker | $1,883.00 |
1 x SET OF CUTTERS | $4,633.32 |
1 x RUBBER BRG | $16.87 |
1 x Car adaptor for Cassida products | $78.95 |
1 x White Silicone Cord for the Sabre Series Cutters | $40.50 |
1 x LEFT BEARING PLATE ASSY 120 | $86.18 |
1 x Belt, Slitting Transport/BCC-228 | $33.93 |
1 x TENSION SPRING | $24.36 |
1 x ASY 2ND FOLD PLATE | $977.20 |
1 x MARK VII MOTOR WIRE ASSEMBLY | $348.60 |