|
The Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil is the top of the line heavy duty electric hole punch. This durable table top punch that has no equal, combining horizontal paper feeding and the Rhin-O-Tuff patented Quick Change Die System with the following exciting features:
With these features plus a 3-year warranty along with all of the standard features below, the HD7700 Ultima heavy duty electric hole punch will handle any size project, large or small. Designed for high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 55 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 21" H x 23" W x 18" D |
Shipping Weight: | 103 Pounds |
![]() 1/4" Challenge/Lassco Drill Bit $29.69 |
![]() Onyx HD7700 Ultima Punch For Wire, $4,634.00 |
![]() 1/8" Hollow Drill Bit for FP60 $39.95 |
![]() 1/8" Baum/Nygreen Dahly Hollow $31.79 |
![]() WirePro 301 EPC 3:1 Heavy Duty $499.00 |
1 x B/F LIFT SPRING | $32.76 |
1 x FORM TENSION BLOCK | $51.23 |
1 x Paddle Wheel | $57.11 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x Renz SRW 360 Modular Drive Motor | $1,781.00 |
1 x DocuGem R1800 18" Paper Cutter | $1,900.00 |
1 x SPRING EXT 7/16X.037X1-1/4 | $23.68 |
1 x Pro Cut 230H Cutting Knife | $206.00 |
1 x Bottom Plate F/DP-460H | $86.10 |
1 x Cutting Wheels for ARC & TE **For black cutting head only** | $135.00 |
1 x Motor | $686.77 |
1 x LATCH, SPRING | $68.08 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x Smartcheck counterfeit detector | $48.95 |
1 x Pro Cut 265 Cutting Knife | $239.00 |
1 x Stitch 'N Fold SF2 Booklet Maker | $14,999.00 |
1 x KEY SHORT | $44.94 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x PP48 NOTCH | $68.66 |
1 x WASER THRST BRG.250X.447X.059 | $23.68 |
1 x RENZ SRW 360 - Manual Wire Punch and Wire Closing Machine | $989.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x Versalam 1300 Single Sided/Double Sides Roll Laminating Machine | $3,137.40 |
1 x Onyx HC8024 24in. Manual Wire Closing Machine | $1,229.00 |
1 x WirePro 301 EPC 3:1 Heavy Duty Electric Punch Wire Binding Machine | $499.00 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x Count Scoring Blade | $63.34 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x G Roll 31,33 | $86.58 |
1 x WirePro Advantage E | $1,849.00 |
1 x ONYX HD8370 Semi-Automatic Wire Closer | $1,729.00 |