|
The HD7700 Ultima is the top of the line heavy duty durable Table Top Punch that has no equal. Combining the Rhin-O-Tuff patented Quick Change Die System with the following exciting new features:
EACH DIE IS SOLD SEPARATELY
With these new features plus a 3 year warranty along with all of the standard features below, the HD7700 Ultima will handle any size project, large or small. Designed for high volume commercial and corporate use.
Maximum Punch Capacity: | 55 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | All |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts AC / 4 AMPS / 60 Hz |
Size: | 9" H x 23" W x 23" D |
Shipping Weight: | 88 Pounds |
![]() FlexiCloser 2 Automatic Wire $1,825.00 |
![]() 3/16" Lawson / Miller HFD / Baum $30.79 |
![]() 38"x250' 10 mil Digikote Gloss $497.07 |
![]() 36" Extended Measuring Arm for the $162.00 |
![]() Roll Laminator Cleaning Kit $62.95 |
1 x GEAR-A 47T+13T PV850H5XXX DISCONTINUED | $21.89 |
1 x 124" Javelin Integra (60289) | $1,467.00 |
1 x TBD - INFRD SNSR WHT LBL NON ROHS | $364.82 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x 10 Up Shipping Labels | $19.95 |
1 x SPUR GEAR 45T PV860D7XXX DISCONTINUED | $20.05 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x 13.5" Knife Guard | $27.00 |
1 x MICROSWITCH | $18.25 |
1 x 19" Knife Guard | $38.00 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x WIRE ASSFTY 638000157 | $35.73 |
1 x Lassco Spinnit FMMH 3 Fully Automatic Hydraulic Three Spindle Paper Drill | $9,950.00 |
1 x Cable Assembly | $122.45 |
1 x Omni 532 Top Side Cutting Knife | $134.00 |
1 x 20" Knife Guard | $40.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x WATER HEATER, 230V (DOMESTIC) | $10,837.19 |
1 x 17" Knife Guard | $34.00 |
1 x 23" Knife Guard | $46.00 |
1 x 23.5" Knife Guard | $47.00 |
1 x Feed Tray | $81.24 |
1 x Timing Pulley/EX-2000 | $24.84 |
1 x WIRE ASSY 638000156 | $22.31 |
1 x Fujipla Drylam ALM 3220 Fully Automatic Laminator | $17,994.00 |
1 x COMPRESSION SPRING | $39.40 |
1 x Gear/DF-755 | $32.67 |
1 x Rosback 250 Bottom Side Cutting Knife | $195.00 |
1 x 62368 36" Stand for 120” Sabre Series 2 | $792.00 |