|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() White Silicone Cord for the Sabre $40.50 |
![]() 51"x250' 5 mil Digikote Satin $625.01 |
1/2" SB-35 Bostitch type staples $7.99 |
![]() 1/8" Challenge Lassco Drill Bit $39.95 |
![]() Baumfolder 80 Cutter Knife $379.00 |
1 x GEAR-A 47T+13T PV850H5XXX DISCONTINUED | $21.89 |
1 x 124" Javelin Integra (60289) | $1,467.00 |
1 x TBD - INFRD SNSR WHT LBL NON ROHS | $364.82 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x 10 Up Shipping Labels | $19.95 |
1 x SPUR GEAR 45T PV860D7XXX DISCONTINUED | $20.05 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x 13.5" Knife Guard | $27.00 |
1 x MICROSWITCH | $18.25 |
1 x 19" Knife Guard | $38.00 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x WIRE ASSFTY 638000157 | $35.73 |
1 x Lassco Spinnit FMMH 3 Fully Automatic Hydraulic Three Spindle Paper Drill | $9,950.00 |
1 x Cable Assembly | $122.45 |
1 x Omni 532 Top Side Cutting Knife | $134.00 |
1 x 20" Knife Guard | $40.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x WATER HEATER, 230V (DOMESTIC) | $10,837.19 |
1 x 17" Knife Guard | $34.00 |
1 x 23" Knife Guard | $46.00 |
1 x 23.5" Knife Guard | $47.00 |
1 x Feed Tray | $81.24 |
1 x Timing Pulley/EX-2000 | $24.84 |
1 x WIRE ASSY 638000156 | $22.31 |
1 x Fujipla Drylam ALM 3220 Fully Automatic Laminator | $17,994.00 |
1 x COMPRESSION SPRING | $39.40 |
1 x Gear/DF-755 | $32.67 |
1 x Rosback 250 Bottom Side Cutting Knife | $195.00 |
1 x 62368 36" Stand for 120” Sabre Series 2 | $792.00 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x VersaBind-E Electric Punch and Binding Machine | $1,799.00 |
1 x 1162 BOARD BLADE | $66.80 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |
1 x 62364 36" Stand for 60” Sabre Series 2 | $562.50 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x THERMAL FUSE #K-356-236 | $182.62 |