|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() WirePro 101 3:1 Wire Punch & Bind $189.00 |
![]() 3" Colored Aluminum Screw Posts $37.30 |
![]() 5/16" Iram / Sterling Long Drill $36.95 |
![]() Triumph 6550 Cutting Knife $306.00 |
![]() Triumph 3915 Cutting Knife $228.00 |
1 x Shaft | $14.31 |
1 x 2230 IR counterfeit detector | $229.95 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x Cassida InstaCheck™ Lithium ion replacement battery | $49.95 |
1 x RENZ TC-20 Thumb Cut Paper Calendar Punch | $189.00 |
1 x SPRING , LARGE | $84.26 |
1 x 64" Javelin Series 2 Cutter Bar | $814.50 |
1 x Metal Loop Hangers | $59.50 |
1 x Guide Rail R Unit | $118.34 |
1 x 90090260027 GAUGE | $114.61 |
1 x Ideal/MBM 508A Automatic Folder | $6,399.00 |
1 x ASY CLUTCH GEAR | $39.39 |
1 x O'RING.093X.437ID | $7.80 |
1 x CONV BELT 14.95 DISCONTINUED | $927.98 |
1 x Paper Receiving Tray DC-8 Micro | $64.64 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x VersaBind-M Manual Punch and Binding Machine | $1,169.00 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x Metal Splint | $66.00 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x Seypa PA 92 Cutting Knife | $680.00 |
1 x PF-P280 Paper Folder | $1,843.00 |
1 x NONSTK-TRANSITION BD ASSY(W CABLE-N | $182.64 |
1 x 84" Javelin Series 2 Cutter Bar | $886.50 |
1 x PHOTO MICRO SENSOR CA021 | $32.83 |
1 x NONSTK-FILM TENSION ADJ LEVER, U-65 | $22.55 |
1 x Seybold 35 1/2" Dynaclamp Cutting Knife | $551.00 |
1 x DF 755 Paper Folder | $2,500.00 |
1 x Sponge Roller Unit/DPM-310 DICONTINUED | $119.42 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x Joint | $32.37 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x B24 Manual Plastic Comb Spreader DISCONTINUED | $289.00 |
1 x Rubber Ring Unit/=941-21320 | $48.44 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x SPRING (714XE#24216) | $21.64 |
1 x Clutch Spring | $11.14 |
1 x PBPro 200 Plastic Comb Binding Machine | $199.00 |
1 x PBPro 301 Electric Comb Punch and Bind Machine | $449.00 |
1 x TBD - KIT F60+ PWR SPLY UPGRADE | $1,281.19 |
1 x ONYX HC8318 18" Wire Inserter / Closer | $2,475.00 |
1 x P/C 15"" CURVED STACK | $73.24 |
2 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $9,680.00 |
1 x HEATER, INCOLOY, F60+-1 | $435.63 |
1 x Staple Cartridge-DCS4 (Refill+Housing) | $71.58 |
1 x NIP,8500 | $8,261.20 |
1 x Minipad Padding Press | $289.00 |
1 x #8X1/2 PH.PH.""B""ZINC | $3.43 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x 90900273001 ENCODER | $2,334.74 |
1 x TW-3100 Manual Wire Punch and Bind Machine | $459.00 |