|
Make your HD Punch more productive by getting the APES-14! APES stands for Automatic Paper Ejector &Stacker module. With your Rhin-O-Tuff HD punch it will punch, eject and stack in one operation. The APES-14 easily attaches to your HD6500 or HD7000 and handles paper sizes from 5 1/2" X 5 1/2" up to 14" X 14" (140 X 140mm to 356 X 356mm). For the occasional job that it can’t handle you can use your HD Punch in standard mode while the APES-14 is still attached.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Binds Books Up To: | None inches |
Shipping Weight: | 58 Pounds |
![]() Perfmaster Sprint Perforating and $6,599.00 |
![]() CoilPro 301 EPI Electric Coil $714.95 |
![]() RAF-11 Fully Automatic $0.00 |
![]() DocuCrease 52 - 20 1/2" Score & $898.00 |
![]() PC2000 Plastic Coil Binding $599.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Passport Die Cutter | $105.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x CAP12 UF 400 V 047680013 | $55.65 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Shelf Push Pins | $49.50 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x FORM CHUTE TOP | $73.38 |
1 x ID Photo Die Cutter | $289.00 |
1 x ANVIL F/AUTOBOOKLETMAKER | $49.62 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Removable Strap Clip | $15.95 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x PCB 115 V | $410.01 |
1 x D842 16-7/8" Heavy Duty Manual Paper Cutter | $1,279.00 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Spring handle | $21.03 |
1 x Book Clamps | $39.95 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x ASY TOP GUIDE | $69.30 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |
1 x Binding Workstation | $219.00 |