|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
![]() Sabre Series 2 GPC 120" Cutter $2,025.00 |
![]() Triumph 6550 Cutting Knife $306.00 |
![]() iWire Wire Punch & Bind Machine $237.00 |
![]() 7/8" I.D. Clear Plastic Snap Rings $12.49 |
![]() 1/8" Challenge Lassco Drill Bit $39.95 |
1 x Cassida Omni-ID Automatic Counterfeit Detector | $249.00 |
1 x Letter 7 Mil Laminating Pouches | $35.58 |
1 x 5" Screw Lock Rings | $32.89 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x #8X1/2 PH.PH.""B""ZINC | $3.43 |
1 x PL244WF 44" Wide Format Roll / Mounting Laminator | $4,999.00 |
1 x EXP 42 Plus Laminator | $6,695.00 |
1 x U-65 INFRARED HEATER 638200059 | $297.74 |
1 x EXP 62" Plus Laminator | $12,095.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x SLITTER ROD ASSM | $7,245.38 |
1 x Pro Cut 230H Cutting Knife | $206.00 |
1 x GUARD, IDLER | $489.43 |
1 x BEARING 93E-40090 | $21.87 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x RUBBER WHEEL PDICI30000#30450 | $65.90 |
1 x FEED TIRE ASSY | $62.56 |
1 x NONSTK-SLITTER BLADE BACK PLATE | $553.44 |
1 x Sponge Roller/DC-645 DISCONTINUED | $502.01 |
1 x OBSOLETE FUSE HOLDER | $32.79 |
1 x 3-sided Mobile Mount | $62.95 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x WirePro Advantage Duo | $699.00 |
1 x THERMAL FUSE #K-356-236 | $182.62 |
1 x SEPARATOR PNEUMATIC ENCLOSURE | $7,511.17 |
1 x 1" Loose Leaf Rings | $21.70 |
1 x Sabre Series 2 GPC 80" Cutter (60737) | $1,625.00 |
1 x Triumph 3900 Cutting Knife | $228.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x LEVER | $25.65 |
1 x SPRING (714XE#24216) | $21.64 |
1 x LAMINATOR PHEUMATIC ENCLOSURE | $10,302.04 |
1 x Triumph 3915 Cutting Knife | $228.00 |
1 x MAIN POWER SWITCH-E7303 | $54.24 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Dura Wire 450 Manual Wire Closer | $349.00 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x NONSTK-LEFT END CAP | $48.76 |
1 x Chandler & Price 1927A Design 1 Cutting Knife | $276.00 |
1 x T100 Thermal Bind | $119.00 |
1 x 9/16" I.D. Black Plastic Snap Rings | $13.66 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x UNLOADER VALVE JUN-AIR 6973300 | $126.95 |
1 x SPRING,L/H CI-12 >USE 0320108200 | $53.44 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |