|
Digikote laminate film contains UV protection to reduce sun fading of your printed documents. It will extend the life of an inkjet print by 2 to 5 times the life of an unlaminated print.
![]() OD4400 Plastic Comb Binding $0.00 |
![]() Sabre 100" Utility Cutter $0.00 |
![]() 3250CL Electric Coil Binding $1,699.00 |
![]() Heavy Duty Hand Slot Punch $59.95 |
![]() 7/32" Martin Yale / Lihit / $33.95 |
1 x Standard 45mm Textile Blades | $25.00 |
1 x Graphik D .017 Blades | $82.80 |
1 x NONSTK-SWITCH RAMP-RH QO3100 | $22.32 |
1 x E65 H/ROLLER>607040513(29 1/4L | $521.18 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x DC GEAR MOTOR >USE 609020200 | $384.89 |
1 x ProClick® P210E Electric Binding Machine (01GBC7708180) | $499.00 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x FORM BELT BRACKET | $21.97 |
1 x Seybold 34" Dynaclamp Cutting Knife | $551.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Horizon BQ-160 Perfect Binder | $20,085.00 |
1 x Replacement Punch Head/Disk Set for XHC-150 Punch, 3 9/32 Heads & 6 Disks/set | $53.59 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $697.50 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x EXIT TRAY P/C | $39.60 |
1 x 3" Screw Lock Rings | $28.95 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x AUTOFEED WHEEL AA1462 FF22 | $88.50 |
1 x NONSTK-LEFT END CAP | $48.76 |
1 x FEED BELT, 62001 | $41.85 |
1 x PB LOGO GEST QB373 | $22.10 |
1 x MTR.BRUSH,LEESON 959 | $66.16 |
1 x RUBBER KEY S/W 637400083 | $54.97 |
1 x 25"x250' 5 mil Digikote Gloss Laminating Film | $194.30 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x GUIDE PLATE#93E-50670 | $21.87 |
1 x Clamp Pads | $57.95 |
1 x DRIVE BELT | $16.70 |
1 x RUBBER WHEEL PDICI30000#30450 | $65.90 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x Cutter Knives | $0.00 |
1 x Pouch Laminating Workstation | $219.00 |
1 x Table Top Slot Punch with Guide | $27.95 |
1 x iCoil 41 Manual Coil Punch and Electric Inserter | $308.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x Lamitek PhotoPro 13" Pouch Laminator | $259.00 |
1 x Roll Laminating Workstation | $279.00 |
1 x Pressure Sensitive Pin | $24.95 |
1 x CoilPro ECI Coil Binding Machine | $309.00 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Finish @ Coil E1 Coil Inserter with built in Electric Crimper | $699.00 |
1 x CoilPro 2000 ECP+ Coil Binding Machine | $1,481.00 |
1 x Collar/DC-745 | $32.28 |