|
The Tamerica TCC-1200 45'' roll laminator can laminate one- or two-sided film up to 45 inches wide. It can laminate all film up to 10 mil thick, hot or cold.
The heated silicone rollers and variable speed and temperature controls allow the operator to get perfect results from a wide variety of film types. The TCC-1200 can also mount projects up to 9/16 inch thick. This heavy duty laminator is perfect for any production environment.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 45" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5.4 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16", 1/4", 1/2", 9/16" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 240 V, 50/60 Hz, 14 A |
Size: | 66 " x 27" x 52" |
Shipping Weight: | 530 Pounds |
1 x T80 Thermal Binder | $529.00 |
1 x 140T 3MM HTD BELT | $48.48 |
1 x Big Bench Xtra for 84" Javelin Xtra & Series 2 | $1,026.00 |
1 x FEED BELT | $44.36 |
1 x 5/16"" X 3"" CLEVIS PIN | $15.47 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x UltraPhoto 13 Photo Pouch Laminator | $699.00 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x PERF LARGE DIVIDER | $126.76 |
1 x T/S BASE PAN, LARGE | $125.52 |
1 x Zippy Cutter | $9.95 |
1 x PLASTIC TEN CRL KNOB 633000030 | $65.12 |
1 x Royo S72JR Cutting Knife | $480.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Versalam-2700 EP Roll Laminator | $3,699.00 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x PCB ASSY | $139.89 |
1 x ML-6 6" Pouch Laminator | $269.00 |
1 x GUIDE | $7.80 |
1 x Ledco Premier 4 Roll Laminator 25" Roll Laminating Machine | $2,949.00 |
1 x Letter 7 Mil Laminating Pouches | $35.58 |
1 x HS-2000 B Business Card Slitter DISCONTINUED | $1,495.00 |
1 x BEARING 5210-031 | $22.10 |
1 x Minikote EZ 27" Roll Laminator | $1,398.00 |
1 x 1/2X5/8X3/8 FL BNG | $4.48 |
1 x DISCONTINUED GRAPHIC LCM DISPLAY | $1,499.70 |
1 x Flat Belt DISCONTINUED | $88.88 |
1 x NONSTK-ROLL PIN, 7/32 X 1-1/8 | $20.07 |
1 x PUNCH PIN SET 3-5-7 MAGNA P70 | $135.27 |
1 x TCC 2700 27" Roll Laminator | $1,625.00 |
1 x 3/8" Solid Brass Screw Posts (100 Sets) | $68.47 |
1 x CATENA TENSION KNOB 633000035 | $42.65 |
1 x Multi–Finisher 3-in-1 Binding Machine for Comb, Coil & Wire | $549.00 |
1 x Cutting Wheels for ARC & TE **For black cutting head only** | $135.00 |
1 x 1" Solid Brass Screw Posts (10 Sets) | $35.89 |