|
The Tamerica TCC-1200 45'' roll laminator can laminate one- or two-sided film up to 45 inches wide. It can laminate all film up to 10 mil thick, hot or cold.
The heated silicone rollers and variable speed and temperature controls allow the operator to get perfect results from a wide variety of film types. The TCC-1200 can also mount projects up to 9/16 inch thick. This heavy duty laminator is perfect for any production environment.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 45" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5.4 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16", 1/4", 1/2", 9/16" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 240 V, 50/60 Hz, 14 A |
Size: | 66 " x 27" x 52" |
Shipping Weight: | 530 Pounds |
![]() Roll Laminator Cleaning Kit $62.95 |
![]() HR 3800 38" Roll Laminator $3,949.95 |
![]() Finish @ Coil M Coil Inserter $419.00 |
![]() 42" Rotatrim Rotary Paper Cutter $639.00 |
![]() LF 283B Paper Folder $0.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Passport Die Cutter | $105.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x CAP12 UF 400 V 047680013 | $55.65 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Shelf Push Pins | $49.50 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x FORM CHUTE TOP | $73.38 |
1 x ID Photo Die Cutter | $289.00 |
1 x ANVIL F/AUTOBOOKLETMAKER | $49.62 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Removable Strap Clip | $15.95 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x PCB 115 V | $410.01 |
1 x D842 16-7/8" Heavy Duty Manual Paper Cutter | $1,279.00 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Spring handle | $21.03 |
1 x Book Clamps | $39.95 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x ASY TOP GUIDE | $69.30 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |