|
The Tamerica TCC-1200 45'' roll laminator can laminate one- or two-sided film up to 45 inches wide. It can laminate all film up to 10 mil thick, hot or cold.
The heated silicone rollers and variable speed and temperature controls allow the operator to get perfect results from a wide variety of film types. The TCC-1200 can also mount projects up to 9/16 inch thick. This heavy duty laminator is perfect for any production environment.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 45" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5.4 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16", 1/4", 1/2", 9/16" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 240 V, 50/60 Hz, 14 A |
Size: | 66 " x 27" x 52" |
Shipping Weight: | 530 Pounds |
3/8" Seybold Standard Drill Bit $32.95 |
Macey 640 Bottom Front Cutting $438.00 |
Adast Maxima MS-115 Cutter Knife $864.00 |
DF 755 Paper Folder $2,500.00 |
Macey 532 Top Side Cutting Knife $134.00 |
1 x 2" Screw Lock Rings | $28.52 |
1 x 6" Screw Lock Rings | $37.01 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x MASTER SWITCH | $531.60 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x TBD - LFT WASHER 1/2 INTFTL. | $23.68 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x Polar 115 Cutting Knife | $642.00 |
1 x RUBBER BRG | $16.87 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x SAFETY THERMASTAT 724.00696.00 | $137.52 |
1 x 3/8 DRILL BIT 2IN CD-6 | $141.13 |
1 x 4" Screw Lock Rings | $29.47 |
1 x FLAT BELT 941-40120 | $73.40 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Camco 250 (16") Cutter Knife | $186.00 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x Adhesive for Horizon BQ-160 PUR | $69.95 |
1 x 23" Knife Guard | $46.00 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x 62364 36" Stand for 60” Sabre Series 2 | $562.50 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Master Feed Clutch/DP-e Series | $64.94 |
1 x Miracle LMM 63 Cutting Knife | $336.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x TOP FUSE ASSY | $36.91 |
1 x Simplex 84" Cutter Bar (SIM210) | $726.30 |
1 x DOUBLE CHAIN LOCK | $21.77 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x PERF HOLE, BASE | $212.13 |
1 x Adhesive for BQ-P60 and BQ-P6 | $169.00 |
1 x Roll Laminator Cleaning Kit | $62.95 |
1 x Leveling Feet for 660 Cutter. | $23.63 |