|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
Stand, Waste Catcher & Roll Feeder $945.00 |
Seybold 64" Dayton Cutting Knife $820.00 |
Omni 562 Bottom Front Cutting $438.00 |
Ad Pad Clip $9.95 |
Triumph 5210 Cutting Knife $259.00 |
1 x 2" Screw Lock Rings | $28.52 |
1 x 6" Screw Lock Rings | $37.01 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x MASTER SWITCH | $531.60 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x TBD - LFT WASHER 1/2 INTFTL. | $23.68 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x Polar 115 Cutting Knife | $642.00 |
1 x RUBBER BRG | $16.87 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x SAFETY THERMASTAT 724.00696.00 | $137.52 |
1 x 3/8 DRILL BIT 2IN CD-6 | $141.13 |
1 x 4" Screw Lock Rings | $29.47 |
1 x FLAT BELT 941-40120 | $73.40 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Camco 250 (16") Cutter Knife | $186.00 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x Adhesive for Horizon BQ-160 PUR | $69.95 |
1 x 23" Knife Guard | $46.00 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x 62364 36" Stand for 60” Sabre Series 2 | $562.50 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Master Feed Clutch/DP-e Series | $64.94 |
1 x Miracle LMM 63 Cutting Knife | $336.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x TOP FUSE ASSY | $36.91 |