|
The PAL-M is a manual paper separator. The PAL-M is used to optimize the amount of paper to be be inserted into the paper punch, not too much and not too little. It will lift the corner of the pile of paper with just the right amount for easy insertion and punching. No more paper jams or inefficient punches. The PAL-M can be used right out of the box in a stand-alone configuration or as a module mounted to any vertical Rhin-O-Tuff OD or HD punch (optional mounting kit available).
Rhin-O-Tuff modular design allows the PAL-M to be mounted on top of the APES (Automatic Paper Ejector and Stacker) system for greater efficiencies. The PAL-M will make any operator an experienced operator. The system offers flexibility enough to handle index tabs, clear covers, and oversized covers.
Maximum Punch Capacity: | None 20# sheets |
Maximum Paper Size: | 8.5 inches |
Construction: | Metal |
Punch Type: | Manual |
Binds Books Up To: | None inches |
Warranty: | 3 Year Warranty |
Size: | 11" x 18 1/2" x 12" |
Shipping Weight: | 22 Pounds |
![]() Hand Held Corner Rounder Punch $69.95 |
![]() MBM/Ideal Trimuph 3610 Cutting $45.95 |
![]() Deko Spring Wobbler $61.95 |
![]() Pressure Sensitive Clip $19.95 |
![]() Velobind System 2 $2,995.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x Paper Sensor Unit/DF-755 | $49.48 |
1 x BEARING 5210-031 | $22.10 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $744.00 |
1 x Metal Loop Hangers | $59.50 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x Phoenix 2700-DHP Dual Heat Laminator — Production Model | $2,549.00 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x Digital 60 Wide Format Laminator | $18,999.00 |
1 x 32" I Bar Shrink Wrap Sealer | $449.00 |
1 x Camco Big 3 Top Side (12") Cutter Knife | $156.00 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x DRIVE BELT | $16.70 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x LEVER | $25.65 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x PLASTIC INSERT F/D00R | $10.66 |
1 x TCC 2700 27" Roll Laminator | $1,625.00 |
1 x GUIDE BRACKET LEFT-DISCONTINUED | $48.44 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x CONTACT BLOCK NC E-1839-8 | $220.73 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x 442 Premium Roller Trimmer | $339.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x Wohlenberg 115 Cutting Sticks | $122.00 |
1 x DISCONTINUED DIE SET LOCK HANDLE | $103.98 |
1 x 3-sided Mobile Mount | $62.95 |
1 x CORK PATCH | $32.91 |
1 x Sign Master 44" Laminator | $8,999.00 |
1 x Micro Switch/DC-645 | $41.63 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x BLNK.SLIT.STOP LATCH | $17.29 |
1 x CIRCUIT BOARD W/ RETRO-REFLEC | $97.54 |
1 x K-30 Replacement Scoring Blade | $6.60 |
1 x LIGHT BULBS 30V 10W FUSE STYLE | $12.47 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x VersaBind-E Electric Punch and Binding Machine | $2,172.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x Graphik D .017 Blades | $82.80 |
1 x Horizon BQ-160 Perfect Binder | $20,085.00 |
1 x EXP 42 Plus Laminator | $6,695.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x K-28/2 Replacement Straight Blade (Pack of 2) | $13.20 |
1 x SNAP SWITCH | $38.19 |
1 x 18" I Bar Shrink Wrap Sealer | $399.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x FXD FORCE GAS SPRING 60LB 3.54 | $81.87 |
1 x Camco 250 (16") Cutter Knife | $186.00 |