|
The ONYX HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine is a 14-inch (356 mm) open-ended spiral, comb, wire and coil punching machine that features the patented “quick change” die system for changing punch patterns in 30 seconds; no tools required and no bolts or screws to replace or misplace. The HD7000 was designed with the operator in mind, offering quick, easy set-up including easy pin pulls and pre-set paper stop positions. With a three-year warranty, this is truly the industry standard.
Rated up to 40 sheets or up to 80 pages of 20-pound (80 gsm) bond paper. The number of sheets depends on the paper weight and punch pattern used. Designed for mid to high volume commercial and corporate use.
EACH DIE IS SOLD SEPARATELY
Maximum Punch Capacity: | 40 20# sheets |
Maximum Paper Size: | 14 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Year |
Power: | 115 Volts, 4 Amps, 60Hz |
Size: | 9" H x 23" W x 20" D |
Shipping Weight: | 81 Pounds |
![]() 1/4" Colored Aluminum Screw Posts $12.85 |
![]() FC114-A Frankencreaser Digital $17,740.00 |
![]() BCS410 Business Card Slitter $2,310.00 |
![]() FP 1XLS Heavy Duty Hole Punch $349.00 |
![]() HD6500 Interchangable Die Punch $0.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Passport Die Cutter | $105.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x CAP12 UF 400 V 047680013 | $55.65 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Shelf Push Pins | $49.50 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x FORM CHUTE TOP | $73.38 |
1 x ID Photo Die Cutter | $289.00 |
1 x ANVIL F/AUTOBOOKLETMAKER | $49.62 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Removable Strap Clip | $15.95 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x PCB 115 V | $410.01 |
1 x D842 16-7/8" Heavy Duty Manual Paper Cutter | $1,279.00 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Spring handle | $21.03 |
1 x Book Clamps | $39.95 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x ASY TOP GUIDE | $69.30 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |