|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
17" Knife Guard $34.00 |
1-3/4" Standard Steel Screw Posts $52.95 |
3/4" Standard Steel Screw Posts $32.01 |
Proteus Workbench For 104" Javelin $805.50 |
5/16" Iram / Sterling Long Drill $36.95 |
1 x C500 heavy duty coin counter and off-sorter | $549.95 |
1 x TCC 2700XM 27" Mounting Roll Laminator | $2,389.00 |
1 x Phoenix 2700-DHP Dual Heat Laminator — Production Model | $2,549.00 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x Proteus Workbench For 124" Javelin Integra | $972.00 |
1 x T/S & FORM BASE | $377.00 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x Big Bench Xtra for 84" Javelin Xtra & Series 2 | $1,026.00 |
1 x Chandler & Price HY 3027 Cutting Knife | $391.00 |
1 x GBC Velobind 750 Electric Velobinder | $4,295.00 |
1 x 18" Knife Guard | $36.00 |
1 x 20" Knife Guard | $40.00 |
1 x 14" Knife Guard | $28.00 |
1 x Makerup Tape | $10.60 |
1 x HS-2000 A-B Business Card Slitter DISCONTINUED | $2,595.00 |
1 x TCC-655Q 25" Two-Sided Roll Laminator | $2,359.00 |
1 x GBC Catena 65 Hot & Cold 25" Roll Laminator | $4,095.00 |
1 x BCS210 Business Card Slitter | $1,685.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x HEATER, INCOLOY, F60+-1 | $435.63 |
1 x 62367 36" Stand for 100” Sabre Series 2 | $792.00 |
1 x Textile Blade Holder | $85.50 |
1 x VeloBind System 1 / GBC V800Pro | $2,199.00 |
1 x Turn_Chuck_ASM/UP-240 | $329.95 |
1 x 5/8" Standard Steel Screw Posts (100 Sets) | $31.29 |
1 x 22.5" Knife Guard | $45.00 |