|
THE ONYX 4000PLUS HAS BEEN DISCONTINUED - IT WAS REPLACED BY THE ONYX OD4012 - PLEASE SEE THIS LINK:
https://www.adss.net/CoilBindingMachines/Onyx-OD4012Heavy-Duty-Electric-Interchangeable-Die-Punch-C22_31-p67891.htm
The ONYX 4000PLUS is an 11 inch (A4) open-ended punch that features the EZ operator changeable dies. It has a paper punching capacity of 20 sheets of 20 pound (80 gsm) bond and a very reasonable price, this punch makes manual punches obsolete. With a three year limited warranty, and a very competitive price, no other solution in its class can match its price performance
The ONYX 4000PLUS comes with 1 punch die of your choice. Other dies are sold separately.
Punch Dies Available for the ONYX 4000PLUS:
Coil Punch Pattern Dies:
4:1 Coil Standard Round Hole, 4:1 Coil Large Rounde Hole, Coil 5mm Round Hole, Coil 6mm Round Hole
Wire Punch Pattern Dies:
2:1 Wire Rectangle Hole, 2:1 Wire Square Hole, 3:1 Wire Square Hole
Comb Punch Pattern Die
Velobind Punch Pattern Die
3 Hole, 2:1 Round Hole, 3:1 Round Hole
Maximum Punch Capacity: | 20 20# sheets |
Maximum Paper Size: | 11 inches |
Construction: | Metal |
Punch Type: | Electric |
Disengageable Punch Pins: | Yes |
Adjustable Hole Depth: | Yes |
Binds Books Up To: | None inches |
Warranty: | 3 Years |
Power: | 115 Volts AC, 2.5 Amps, 60 Hz |
Size: | 6" H x 16" W x 15" D |
Shipping Weight: | 31 Pounds |
Rosback BIG 3 Bottom Side Cutting $161.00 |
MBM Triumph 5255 20 3/8 inch Fully $14,359.00 |
Omni 642 Bottom Front Cutting $438.00 |
2" Screw Lock Rings $28.52 |
Harris 542 Top Side Cutting Knife $134.00 |
1 x 2" Screw Lock Rings | $28.52 |
1 x 6" Screw Lock Rings | $37.01 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x MASTER SWITCH | $531.60 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x 30" Nickel Plated Bead Neck Chains | $29.95 |
1 x TBD - LFT WASHER 1/2 INTFTL. | $23.68 |
1 x Cut HP Relay Cable Unit/DC-645 DISCONTINUED | $272.44 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x Polar 115 Cutting Knife | $642.00 |
1 x RUBBER BRG | $16.87 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x SAFETY THERMASTAT 724.00696.00 | $137.52 |
1 x 3/8 DRILL BIT 2IN CD-6 | $141.13 |
1 x 4" Screw Lock Rings | $29.47 |
1 x FLAT BELT 941-40120 | $73.40 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Camco 250 (16") Cutter Knife | $186.00 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x Adhesive for Horizon BQ-160 PUR | $69.95 |
1 x 23" Knife Guard | $46.00 |
1 x Triumph 3600 Cutting Knife | $78.00 |
1 x 62364 36" Stand for 60” Sabre Series 2 | $562.50 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Master Feed Clutch/DP-e Series | $64.94 |
1 x Miracle LMM 63 Cutting Knife | $336.00 |
1 x 60951 Evolution 2 Bench for the 84" Evolution E2 | $931.50 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x TOP FUSE ASSY | $36.91 |
1 x Simplex 84" Cutter Bar (SIM210) | $726.30 |
1 x DOUBLE CHAIN LOCK | $21.77 |
1 x Onyx APES-14 Automatic Paper Ejector and Stacker | $3,799.00 |
1 x PERF HOLE, BASE | $212.13 |
1 x Adhesive for BQ-P60 and BQ-P6 | $169.00 |
1 x Roll Laminator Cleaning Kit | $62.95 |
1 x O-RING-JACKSHAFT >USE 0750100400 | $20.72 |
1 x NONSTK-SLITTER BLADE BACK PLATE | $553.44 |
1 x Sabre Series 2 GPC 80" Cutter (60737) | $1,625.00 |
1 x 22.5" Knife Guard | $45.00 |
1 x BOTTOM FUSE ASSY DISCONTINUED | $27.14 |
1 x GUIDE PAPER EDGE BIN >USE 7704972 | $22.99 |