|
This kit allows your 63" Excalibur series cutter to stand on its own. Use this kit where you don't have wall space to mount the Excalibur, or where your workflow requires it to be away from a wall.
This is just the free-standing kit; the Excalibur is not included.
![]() The Peach 3500 13" Photo Pouch $0.00 |
![]() Clamp Pads $57.95 |
![]() 6" Countertop Literature Holder $119.50 |
![]() HS-2000 B Business Card Slitter $1,495.00 |
![]() Lightweight 6" Wall Mount $23.50 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x SWITCH ACTUATOR, IS127020 | $229.18 |
1 x O-RING DRIVE BELT-CC2700 | $43.98 |
1 x HR 3800 Take Up Roller | $299.00 |
1 x Ceiling Grid Squeeze Clips | $21.50 |
1 x THERMAL FUSE #K-356-236 | $182.62 |
1 x ROLL CUTTER BLADE 810500018 | $23.68 |
1 x Simplex 124" Cutter Bar (SIM310) | $898.20 |
1 x James Burns Lhermite EB3500 14" Electric Wire Closer | $6,209.00 |
1 x 5" Easel Backs | $29.95 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x Bolt - DISCONTINUED | $41.63 |
1 x PS-10 Rotary Crash Numbering Machine | $16,950.00 |
2 x VersaBind-Ei Electric Punch and Binding Machine | $4,798.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x Dura Wire 450 Manual Wire Closer | $349.00 |
1 x ONYX HD8370 Semi-Automatic Wire Closer | $1,729.00 |
1 x Sensor Kit #2 (Stopper Sec.)/DBM-120 (#P1280) | $104.60 |
1 x MAGNA EDGE GUIDE KIT | $82.92 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Large Loop Head Adhesive Buttons | $99.00 |
1 x SHIM RING (PACMASTER | $79.58 |
1 x 755 RW BUMPERS | $3.68 |
1 x 57MM CORE- TITAN 810500081 | $23.68 |
1 x Hoerauf 135A Top Left Cutting Knife | $354.00 |
1 x 1/2" Aluminum Screw Posts | $17.02 |
1 x FUSE 1/2 AMP | $20.52 |
1 x 3/8" Type HO-3/8 staples | $6.05 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x WirePro Advantage Wire Binding Machine | $259.00 |
1 x DRIVEN NIP ROLER SHAFT DISCONTINUED | $236.75 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |