|
The Spectra-Coat 30" UV Coater is available as a hand-fed unit or with an air feeder. A deep-pile outfeed stacker is also available. It runs up to one-quarter inch thick substrates, with an option of running up to 1 inch thick substrates.
Speed: | 2333 Inches/Minute |
Maximum Sheet Size: | 30” x any hand feed 30” x 40” with feeder inches |
Mimimum Paper Thickness: | 100# Text |
Maximum Paper Thickness: | 0.125" |
Power: | 208-240 Volts, 75 Amps, 3Ø Y (add 10 Amps with feeder) |
Size: | 45" x 172" x 54" |
![]() 6 inch Plastic Loop Straps $9.95 |
![]() GBC Locking Laminator Cabinet $859.00 |
![]() Macey ST100 Cutting Knife $134.00 |
![]() Heavy Duty Long Handle Slot Punch $79.95 |
![]() Onyx PAL-14 Picks-A-Lift Automated $2,799.00 |
1 x 755 RW BUMPERS | $3.68 |
1 x TIMING PULLEY UNIT 96G-60390 | $61.33 |
1 x SPRING, HANDLE. | $23.68 |
1 x DRIVE GEAR | $30.81 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x Stepping Motor | $81.65 |
1 x HOOK-COIL HOLE FTAFT | $73.39 |
1 x RUBBER WHEEL 96V-22100 | $111.50 |
1 x Kolbus HD 150 (10 Hole) Cutting Knife | $330.00 |
1 x HEATER, INCOLOY, F60+-1 | $435.63 |
1 x GBC Electric Velobind V110e | $249.00 |
1 x REWIND TUBE T-165 810500068 | $65.30 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x 6mm Euro Standard Hollow Drill Bit | $44.98 |
1 x ROLLER 99S-43051 | $1,400.21 |
1 x 27"x250' 3 mil Digikote Gloss | $96.36 |
1 x Chandler & Price X3727 Cutting Knife | $468.00 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x LEVER GUIDE (FEED TBL) 630600167 | $32.76 |
1 x P TOPIC MAIN ROLLER TEFLON | $1,576.33 |
1 x Dahle 556 37-1/2" Rotary Cutter | $409.00 |
1 x 43"x250' 3 mil Digikote Gloss Laminating Film | $153.47 |
1 x NONSTK-FRONT LABEL STICKER | $20.65 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x C-Channels | $47.95 |
1 x Pressure Sensitive Pin | $24.95 |
1 x ID Photo Die Cutter | $289.00 |