|
The Spectra-Coat 25" UV Coater is available as a hand-fed unit or with an air feeder. A deep-pile outfeed stacker is also available. It runs up to one-quarter inch thick substrates, with an option of running up to 1 inch thick substrates.
Speed: | 2333 Inches/Minute |
Maximum Sheet Size: | 25" x any (hand feed) 22” x 28” with Feeder inches |
Mimimum Paper Thickness: | 100# Text |
Maximum Paper Thickness: | 0.125" |
Power: | 208-240 V, 65 A, 3Ø Y (+10 A with stacker) |
Size: | 45" x 149" x 46" |
Weight: | 1600 Pounds |
![]() Martin Yale 2650 Cutting Knife $319.00 |
![]() 5/16 inch Plastic Binding Combs $5.22 |
![]() 1 inch Plastic Binding Combs $26.97 |
![]() Wohlenberg A 132 U Cutting Knife $942.00 |
![]() Wohlenberg RW 6256 Cutting Knife $828.00 |
1 x 44" Javelin Series 2 Cutter Bar | $778.50 |
1 x Big Bench Xtra for 124" Javelin Xtra & Series 2 | $1,170.00 |
1 x 22000255010 DECURL BAR SLEEVE | $45.63 |
1 x Campeador S72TA Cutter Knife | $480.00 |
1 x FP60 High Capacity Paper Drill | $1,449.00 |
1 x LAMINATOR PHEUMATIC ENCLOSURE | $10,302.04 |
1 x DC Motor Controller, 4USCK212 | $2,929.12 |
1 x Roll Laminating Workstation | $279.00 |
1 x RETARDER ASSEMBLY | $69.30 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x 1" Solid Brass Screw Posts (10 Sets) | $35.89 |
1 x ASY GC10 MAIN MOTOR ASSEMBLY | $540.23 |
1 x Stopper/DBM-350 | $71.62 |
1 x Link | $5.06 |
1 x Campeador JR Cutter Knife | $480.00 |
1 x Poly Off Roll Laminator Cleaner | $59.95 |
1 x FP 1XLS Heavy Duty Hole Punch | $349.00 |
1 x BOTTOM FUSE ASSY DISCONTINUED | $27.14 |
1 x 3/8" Push-to-Lock Loop Screws | $19.60 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x TOP FUSE ASSY | $36.91 |
1 x Martin Yale 2620 Cutting Knife | $319.00 |