|
These 1 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more.
No expensive binding machines to buy — just punch or drill a hole and you can get started. The size given in the table is the thickness of your document (or other material) that the post will handle.
If you are using screw posts on very heavy materials, such as carpet samples, we recommend you use our Round Head Heavy Duty Steel screw posts. These posts can not be used with our perma-lock screws because the screws are longer than these short posts.
Technical Details
![]() CR 20 Corner Rounder $295.00 |
![]() 25"x250' 5 mil Digikote Gloss $194.30 |
![]() Yellow "T" Silicone Cords $39.15 |
![]() Kutrimmer 2035 13 3/4" Paper $0.00 |
![]() AccuBind Pro2 Tape Binder $5,495.00 |
1 x SLIDE F PRE-REGULAT.IB#2558310 | $21.45 |
1 x BELT, PRE-FOLD TRANSPORT PAIR | $400.98 |
1 x Driving Roller/DC615 | $321.18 |
1 x TBD - WRIST PIN 111PM-3 | $66.27 |
1 x SPROCKET 12T | $37.79 |
1 x Micro Switch/DC-645 | $41.63 |
1 x Wire Unit/AF-100 | $32.37 |
1 x HELICAL WEAR PAD | $14.67 |
1 x PIVOT BOLT | $38.52 |
1 x 1-1/2" Standard Steel Screw Posts (100 Sets) | $41.84 |
1 x CoilPro 2000 EPI Coil Binding Machine | $1,799.00 |
1 x Flat Belt/DC615 | $66.27 |
1 x 1/4" Long Handle Hole Punch | $79.95 |
1 x SWITCH BAR | $36.49 |
1 x 25"x250' 3 mil Digikote Gloss Laminating Film | $89.21 |
1 x Ceiling Grid Clip Hangers | $12.95 |
1 x 5/8" Standard Steel Screw Posts (100 Sets) | $31.29 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x CoilPro 2000 ECP+ Coil Binding Machine | $1,481.00 |
1 x HTSHOE CVR PLSTC W PRNT DISCONTINUED | $45.84 |
1 x Vertical Graphik Blade Holder | $90.00 |