|
These 1/2 inch steel screw posts are the same size as our industry-standard aluminum screwposts. You can use these any place you would use an aluminum screwpost but want the extra strength of steel.
These screwposts feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding photo albums, scrapbooks, samples, leather products, store and trade show displays, and more.
No expensive binding machines to buy — just punch or drill a hole and you can get started. The size given in the table is the thickness of your document (or other material) that the post will handle.
If you are using screw posts on very heavy materials, such as carpet samples, we recommend you use our Round Head Heavy Duty Steel screw posts. These posts can not be used with our perma-lock screws because the screws are longer than these short posts.
Technical Details
Replacement Cutting Wheels for 63" $85.50 |
Plastic NX Snaprail™ $49.95 |
Replacement 28mm Fabric Cutting $117.00 |
1/4" Lassco Spinnit® 1" Hollow $29.95 |
3/8" Standard Steel Screw Posts $12.13 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Pilot Light | $17.96 |
1 x Foldup 4" Wall Mount Literature Holder | $84.00 |
1 x ASSEMBLY, REMVBLE IDLER W/STAN | $1,496.14 |
1 x Clutch Unit | $92.91 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x CR828 Semi-Automatic Creaser | $1,195.00 |
1 x Badge Reels | $2.95 |
1 x Passport Die Cutter | $105.00 |
1 x Coil Crimper Pliers | $29.99 |
1 x Zippy Cutter | $9.95 |
1 x Speedy-Lam 330R-10 10 Roller Pouch Laminator | $1,295.00 |
2 x Pressure Sensitive Clip | $39.90 |
1 x PIN SERVICE KIT C4 | $91.91 |
1 x 18" (45cm) Safety Straight Edge | $84.30 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x 62359 Stand, Waste Catcher & Roll Feeder Package for 120” Sabre Series 2 | $1,698.00 |
1 x SLIDE F.BOLT 2551110 | $23.68 |
1 x ML-9 9" Pouch Laminator | $299.00 |
1 x Business Card Pockets | $4.49 |
1 x HOUSING, SIPLICITY BEARING #PB | $275.31 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x RUBBER KEY S/W U-65 637400077 | $49.51 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x TCC-1200 Wide Format 45" Roll Laminator | $8,499.00 |
1 x NONSTK-INDICATOR LIGHT,RED,24V | $48.74 |
1 x PAPER SEPRTR >USE T12H26070 | $56.17 |
1 x CAP BEARING MOLDED | $35.22 |
1 x Photo Microsensor (KI1234-AALF)/DC615 | $51.22 |
1 x #214 SILICONE O-RING | $8.16 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x Plastic Luggage Strap | $19.95 |
1 x 62351 Stand, Waste Catcher & Roll Feeder Package for 40” Sabre Series 2 | $1,125.00 |
1 x Take One Coupon Clip | $376.00 |
1 x CRADLE BUSHING | $283.70 |
1 x CAPSTAN ROLLER GRIND | $120.22 |
1 x 62361 36" Stand for 40” Sabre Series 2 | $553.50 |
1 x MBM BC12 12up Business Card Cutter | $5,399.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x DOUBLE DRIVE GEAR 2601062 DISCONTINUED | $110.71 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x 7" Easel Backs | $31.95 |
1 x 5" x 12" Paper Cutter Jogging Block | $84.00 |
1 x Pulley Unit | $25.95 |
1 x Binding Workstation | $219.00 |
1 x CR818 Manual Creaser | $620.00 |
1 x MENU SIZE (3 MIL) RF | $197.23 |
1 x Refill No.500 Staples (DC-S4, DFC-S, DBM-80H, AR-F15) | $129.60 |
1 x Finned Price Rail Flag Holder | $85.95 |
1 x HS-3000-GC Gutter Cut Business Card Slitter DISCONTINUED | $3,995.00 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x Nylon Secure Tack | $13.50 |
1 x C900 ultra heavy duty coin counter and sorter | $1,389.95 |
1 x ECP13 Electric Perforator & Creaser | $1,799.00 |
1 x ROLLER BEARING, HEAT | $63.26 |
1 x ASSEMBLY, REWIND, ORCA II | $1,044.41 |
1 x ASSEMBLY, REWIND, ORCA II
This product has been added to your cart.
For more information, click on the Cart button at the top of the page.