|
These 5/8" bright brass binding posts and screws are the same shape and size as our aluminum screw posts, but they are made from solid brass. They feature a low-profile, flattened head on both the screw and the post. They have a nice clean look when used for binding leather products, samples, photo albums, scrapbooks, store and trade show displays, and more.
In addition to the appearance of solid brass, these are stronger than the equivalent aluminum posts. Posts and screws are passivated and waxed to help prevent tarnishing. You don't need to buy an expensive binding machines either — just just punch or drill a hole, insert the post, and tighten the screw.
The size given in the table is the thickness of your document (or other materials) that the screwpost will bind together. The quantity per package listed below is the number of sets per package (a set being one post and one screw).
Note: These posts can not be used with our perma-lock screws.
Technical Details
![]() Polar 66 Cutting Sticks $50.95 |
![]() Lawson 52" Pacemaker III Cutting $750.00 |
![]() MBM/Ideal Trimuph 4850 Cutting $75.98 |
![]() MBM/Ideal Trimuph 3800 Cutting $39.95 |
![]() Polar 137 Cutting Sticks $103.00 |
1 x CoilPro 2000 EPI+ Coil Binding Machine | $1,799.00 |
1 x 90007265065 END CAP 40X40 | $22.10 |
1 x 50P61 CAM BLOCK | $39.48 |
1 x Pull down rod 44013 | $245.28 |
1 x Pigtail Ceiling Hangers | $47.95 |
1 x Replacement Punch Head/Disk Set for XHC-150 Punch, 3 9/32 Heads & 6 Disks/set | $53.59 |
1 x iCoil 41+ PLUS Manual Coil Punch and Electric Inserter | $348.00 |
1 x DRIVE ROLLER ORANGE 5003018 | $401.94 |
1 x CoilPro 1000 Coil Binding Machine | $199.00 |
1 x CBX-100 Automatic Heavy Duty Punching Machine | $5,795.00 |
1 x SCR MACH PHL TRS HD 6-32X3/8 | $23.93 |
1 x 84" Javelin Integra (60287) | $1,143.00 |
1 x THERMOSTAT 40-6161DISCONTINUED | $200.78 |
1 x 5/8" Standard Steel Screw Posts (100 Sets) | $31.29 |
1 x SPB 360 Manual Coil Punch and electrical inserter built in Cutter/Crimper | $2,509.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x TOP LT BAR SPRT | $15.58 |
1 x 1/2" Solid Brass Screw Posts (10 Sets) | $28.01 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x CR818 Manual Creaser | $620.00 |
1 x Big Bench Xtra for 84" Javelin Xtra & Series 2 | $1,026.00 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x 2.25 IDX.25D RNDBELT | $11.41 |
1 x R Clip | $215.00 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x CIRCUIT BOARD W/ RETRO-REFLEC | $97.54 |