|
These sign channels hold signs up to 0.065” thick and mount securely to vertical surfaces with foam or film tape. This “H” channel works with the 0.060” Sign Channel or the 0.070” Sign Channel to provide a center point when mounting signs directly above and below each other.
![]() 25" x 250' 3 Mil Gloss Laminating $48.96 |
![]() XR Long Blades $27.00 |
![]() 9" x 100' 10 Mil Gloss Laminating $28.96 |
![]() 1/8" or 1/4" "H" Sign Channel $47.95 |
![]() Sight Line Strips for 63" $58.50 |
1 x PUNCH PIN .156 3-1 AP1 | $89.84 |
1 x FUSE STICKER 27C | $22.55 |
1 x DISCHARGE O-RING | $56.63 |
1 x Velobind System 2 | $2,995.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Rubber Ring Unit | $67.91 |
1 x TENSION BOLT 632501328 | $55.62 |
1 x 90900273002 ENCODER | $2,056.93 |
2 x UltraPhoto 13 Photo Pouch Laminator | $1,398.00 |
1 x 60953 Evolution 2 Bench for the 124" Evolution E2 | $1,066.50 |
1 x Onyx 3 in 1 PPS | $10,370.00 |
1 x WIRE ASSY 638000156 | $22.31 |
1 x VBF 135A Top Left Cutting Knife | $354.00 |
1 x 1" Aluminum Screw Posts | $21.11 |
1 x Bulk Adhesive for Horizon Perfect Binders | $375.00 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x CORD SET-115V | $35.17 |
1 x 3" x 10" Paper Cutter Jogging Block | $62.40 |
1 x GBC Electric Velobind V110e | $249.00 |
1 x 36" Extended Measuring Arm, fits all models | $175.50 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x STRAP - JOG | $206.52 |
1 x Seypa S 87 Cutting Knife | $648.00 |
1 x PP03 BLANK PUNCH | $17.64 |
1 x 4" x 12" Paper Cutter Jogging Block | $75.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x Replacement Cutting Head for ARC & TE | $205.20 |
1 x Powerhouse PF17A Auto Paper Folder | $2,249.95 |
1 x 62366 36" Stand for 80” Sabre Series 2 | $693.00 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x 2-1/2" Loose Leaf Rings | $45.73 |
1 x Bearing, DBM-500/=013-10032 | $67.87 |
1 x O-RING-LRG-ROLLER >USE 0750109600 | $26.26 |
1 x ML-13 13" Pouch Laminator | $329.00 |
1 x GUIDE PAPER EDGE BIN >USE 7704972 | $22.99 |
1 x ROLLER, NIP IDLER | $59.84 |
1 x CB 3.8 602 W/O MTR | $1,441.84 |
1 x TRANSFORMER 600205 | $1,257.34 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x NIP,8500 | $8,261.20 |
1 x HEX HEAD SHAFT F/4104A N/S | $72.44 |
1 x WASHER M6 9930300 | $24.36 |
1 x ML-6 6" Pouch Laminator | $269.00 |
1 x Sight Line Strips for 63" Excalibur Series Cutters | $58.50 |