|
Length: | 42" (105cm) |
![]() CR135 Paper Creaser/Scorer NOT IN $289.00 |
![]() Polar 137 EMC Version 2 Auto Trim $1,165.00 |
![]() FC114-A Frankencreaser Digital $17,740.00 |
![]() Polar 137 Cutting Knife $1,165.00 |
![]() BQ-P60 Perfect Binding System $6,795.00 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x NONSTK-FRONT LABEL STICKER | $20.65 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x NONSTK-UPPER HOUSING,GL-4 | $47.35 |
1 x TUBE, REWIND, O-III 3 X 6 | $165.47 |
1 x LATCH, SPRING | $68.08 |
1 x Multicut 10/720 Cutting Knife | $430.00 |
1 x GLUE TNK TMP SAFETY SNSR-E7317 | $64.37 |
1 x HEAT SENSOR BD 4250 9R011S | $179.32 |
1 x DISCONTINUED Wire Unit DC-8 Micro | $47.97 |
1 x Multicut 10/710 Cutting Knife | $430.00 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Pressure Sensitive Clip | $19.95 |
1 x Type A Hollow Drill Sharpener | $129.00 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM/Ideal AP45 Air Purifier | $379.00 |
1 x Heavy Duty Hand Slot Punch | $59.95 |
1 x Roll Laminator Cart | $469.00 |
1 x XHC-150 Extra Heavy-Duty 3 Hole punch | $179.95 |
1 x B/O UPPER EXIT SHAFT | $69.90 |
1 x #214 SILICONE O-RING | $8.16 |
1 x Sprocket | $11.14 |
1 x Creasematic 150 Programmable Creaser | $7,495.00 |
1 x CV7 FEED ROLLER | $60.59 |
1 x Polar 107 EL Cutting Knife | $642.00 |
1 x PULLEY-GEAR COMBO-ON 1611 LIN | $17.92 |