|
The Sabre Series 2 GPC 60739 General purpose cutter for media size up to 120” with a 5 year general warranty on all parts (except blades) and a 20 year warranty on the bearings.
Designed to cut a wide range of sheet materials, the Sabre Series 2 GPC 120" Cutter offers a standard of straight, square and clean cutting. It is designed for use on a bench or attached to the optional stand. Sabre Series 2 includes blade depth adjustment and features a cutter head which automatically retracts to a safe position when not in use.
The innovative hinge and lift arm mechanism makes it possible to cut materials, which are longer than the length of the cutter. It also accepts materials of varying thickness without affecting either the line or angle of cut. Superbly styled, the extruded anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting.
The new Sabre Series 2 GPC cutting head features a reversible Graphix Blade making it ideal for left-handed and right-handed operators. The blade locking thumb screw adds safety and convenience.
A full length silicone rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.
Cut Length: | 120" inches |
Capacity: | 1/2" |
Size: | 124" W x 14 1/4" D x 2 1/4" H |
3/16" Martin Yale / Lihit / $33.95 |
1/8" Pioneer Standard Drill Bit $31.79 |
1/4" Lassco Wizer Standard Corner $195.00 |
Count Scoring Blade $63.34 |
5/16" Lawson / Miller HFD / Baum $32.95 |
1 x 90090266007 GREASE FITTING | $22.10 |
1 x Replacement 28mm Fabric Cutting Wheels | $117.00 |
1 x 36" (90cm) Safety Straight Edge | $125.00 |
1 x P TOPIC MAIN ROLLER TEFLON | $1,576.33 |
1 x DEBURR CORNERS&BREAK | $390.98 |
1 x NONSTK-ASSEMBLY,CHAIN TENSIONER | $987.26 |
1 x 5080 Electric Stapler | $599.00 |
1 x NONSTK-UPPER MEMBRANE END CAP-RH | $17.55 |
1 x Finish @ Coil M Coil Inserter | $419.00 |
1 x ONYX HD4170 Electric Rhino-O-Roll Coil Inserter | $1,679.00 |
1 x W117L Skrebba Heavy Duty Stapler DISCONTINUED | $198.00 |
1 x Count Slit Blade | $46.50 |
1 x SPB 360 Comfort - Electric Spiral Coil Punch and Inserter built in Cutter/Crimper | $3,895.00 |
1 x Sabre Series 2 GPC 100" Cutter (60738) | $1,810.00 |
1 x HEATER, INCOLOY, F60+-1 | $435.63 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x EXIT SENSOR | $73.88 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x TAPER BUSHING BORE 1-5/8 1610 | $55.60 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x XXXHOLDXXX 16GA1.50"X48" CRS | $25.35 |
1 x H/R SIDE WASHER BS1.0T 99X42 | $37.25 |
1 x PHOTO SWITCH (LS1)-E7205 | $67.00 |
1 x Sheridan CT Trimmer Cutting Knife | $372.00 |
1 x ELBOW MALE 1/4 TO 1/8 NPT | $48.65 |