|
The Sabre Series 2 GPC 60739 General purpose cutter for media size up to 120” with a 5 year general warranty on all parts (except blades) and a 20 year warranty on the bearings.
Designed to cut a wide range of sheet materials, the Sabre Series 2 GPC 120" Cutter offers a standard of straight, square and clean cutting. It is designed for use on a bench or attached to the optional stand. Sabre Series 2 includes blade depth adjustment and features a cutter head which automatically retracts to a safe position when not in use.
The innovative hinge and lift arm mechanism makes it possible to cut materials, which are longer than the length of the cutter. It also accepts materials of varying thickness without affecting either the line or angle of cut. Superbly styled, the extruded anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting.
The new Sabre Series 2 GPC cutting head features a reversible Graphix Blade making it ideal for left-handed and right-handed operators. The blade locking thumb screw adds safety and convenience.
A full length silicone rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.
Cut Length: | 120" inches |
Capacity: | 1/2" |
Size: | 124" W x 14 1/4" D x 2 1/4" H |
![]() Triumph 6550 Cutting Knife $306.00 |
![]() iWire Wire Punch & Bind Machine $237.00 |
![]() 7/8" I.D. Clear Plastic Snap Rings $12.49 |
![]() 1/8" Challenge Lassco Drill Bit $39.95 |
![]() Onyx OD4012 Heavy Duty Electric $2,574.00 |
1 x Cassida Omni-ID Automatic Counterfeit Detector | $249.00 |
1 x Letter 7 Mil Laminating Pouches | $35.58 |
1 x 5" Screw Lock Rings | $32.89 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x #8X1/2 PH.PH.""B""ZINC | $3.43 |
1 x PL244WF 44" Wide Format Roll / Mounting Laminator | $4,999.00 |
1 x EXP 42 Plus Laminator | $6,695.00 |
1 x U-65 INFRARED HEATER 638200059 | $297.74 |
1 x EXP 62" Plus Laminator | $12,095.00 |
1 x 4" Screw Lock Rings | $29.47 |
1 x SLITTER ROD ASSM | $7,245.38 |
1 x Pro Cut 230H Cutting Knife | $206.00 |
1 x GUARD, IDLER | $489.43 |
1 x BEARING 93E-40090 | $21.87 |
1 x IDLER SHAFT MOUNT | $624.20 |
1 x RUBBER WHEEL PDICI30000#30450 | $65.90 |
1 x FEED TIRE ASSY | $62.56 |
1 x NONSTK-SLITTER BLADE BACK PLATE | $553.44 |
1 x Sponge Roller/DC-645 DISCONTINUED | $502.01 |
1 x OBSOLETE FUSE HOLDER | $32.79 |
1 x 3-sided Mobile Mount | $62.95 |
1 x Simplex 64" Cutter Bar (SIM160) | $675.90 |
1 x WirePro Advantage Duo | $699.00 |
1 x THERMAL FUSE #K-356-236 | $182.62 |
1 x SEPARATOR PNEUMATIC ENCLOSURE | $7,511.17 |
1 x 1" Loose Leaf Rings | $21.70 |
1 x Sabre Series 2 GPC 80" Cutter (60737) | $1,625.00 |
1 x Triumph 3900 Cutting Knife | $228.00 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x LEVER | $25.65 |
1 x SPRING (714XE#24216) | $21.64 |
1 x LAMINATOR PHEUMATIC ENCLOSURE | $10,302.04 |
1 x Triumph 3915 Cutting Knife | $228.00 |
1 x MAIN POWER SWITCH-E7303 | $54.24 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Dura Wire 450 Manual Wire Closer | $349.00 |
1 x SHAFT, UPPER PILE TABLE LIFT | $2,417.46 |
1 x 1/2" Loose Leaf Rings | $24.27 |
1 x NONSTK-LEFT END CAP | $48.76 |
1 x Chandler & Price 1927A Design 1 Cutting Knife | $276.00 |
1 x T100 Thermal Bind | $119.00 |
1 x 9/16" I.D. Black Plastic Snap Rings | $13.66 |