|
The Sabre Series 2 GPC 60738 General purpose cutter for media size up to 100” with a 5 year general warranty on all parts (except blades) and a 20 year warranty on the bearings.
Designed to cut a wide range of sheet materials, the Sabre Series 2 GPC 100" Cutter offers a standard of straight, square and clean cutting. It is designed for use on a bench or attached to the optional stand. Sabre Series 2 includes blade depth adjustment and features a cutter head which automatically retracts to a safe position when not in use.
The innovative hinge and lift arm mechanism makes it possible to cut materials, which are longer than the length of the cutter. It also accepts materials of varying thickness without affecting either the line or angle of cut. Superbly styled, the extruded anodized aluminum base incorporates a narrow groove to accept the blade tip when cutting.
The new Sabre Series 2 GPC cutting head features a reversible Graphix Blade making it ideal for left-handed and right-handed operators. The blade locking thumb screw adds safety and convenience.
A full length silicone rubber grip strip mounted in the surface of the base and two more on the underside of the cutter bar ensures all work is held perfectly in place while cutting and provides protection for even the most sensitive surfaces.
Cut Length: | 100" inches |
Capacity: | 1/2" |
Size: | 104" W x 14 1/4" D x 2 1/4" H |
![]() Macey 642 Bottom Front Cutting $438.00 |
![]() 1/5 Cut Single Reverse Printable $125.00 |
![]() Graphik D .017 Blades $82.80 |
![]() 14" Shrink Wrap Film $97.76 |
![]() Plastic Secure Strap $19.95 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x TCC 2700 27" Roll Laminator | $1,625.00 |
1 x Minikote EZ 27" Roll Laminator | $1,398.00 |
1 x Itoh 100 Cutting Knife | $1,062.00 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x HEATER, 220V AD | $610.92 |
1 x Complete Cutting Head Replacement for 63" Excalibur 5000 Black Head | $1,070.00 |
1 x OLFA 45mm Textile Blades | $150.00 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x Sabre Series 2 GPC 80" Cutter (60737) | $1,625.00 |
1 x Versalam-2700 EP Roll Laminator | $3,699.00 |
1 x VBF 135A Top Right Cutting Knife | $354.00 |
1 x Sabre Series 2 GPC 60" Cutter (60736) | $1,430.00 |
1 x SAW REAR TOWER RAIL | $40.93 |
1 x MBM Triumph 5255 20 3/8 inch Fully Automatic Paper Cutter | $14,359.00 |
1 x 1" Push-to-Lock Loop Screws | $21.95 |
1 x REWIND TUBE T-165 810500068 | $65.30 |
1 x GBC Catena 65 Hot & Cold 25" Roll Laminator | $4,095.00 |
1 x Ledco Professor 27" Hot Roll Laminator | $4,810.00 |