|
The Versalam-2700 P does it all: single or double sided laminating, with all film up to 10 mil, and mounting too. It's a great soultion for all of your laminating needs up to 27" wide.
The heated rollers give great results even when laminating difficult materials. The adjustments for temperature, speed, and pressure allow you to use most laminating films at their optimum settings.
Max. Laminate Thickness: | 3/16" Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 4.4 feet/minute |
Slitters: | No |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 110 V, 60 Hz, 1600 W |
Size: | 23-1/2" x 51" x 26-1/2" |
Shipping Weight: | 158 Pounds |
![]() 3/8" Colored Aluminum Screw Posts $29.06 |
![]() Book Clamps $39.95 |
![]() 1" Colored Aluminum Screw Posts $17.70 |
![]() CBX-100 Automatic Heavy Duty $5,795.00 |
![]() 3/4" Colored Aluminum Extensions $14.99 |
1 x PH P.W.B. Unit | $84.67 |
1 x ROLL CUTTER BLADE 810500018 | $23.68 |
1 x LED P.W.B. Unit DISCONTINUED | $105.62 |
1 x PULL ROLL SPROCKET PRS326 | $103.98 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x GROMMET .25IDX.44OD | $3.43 |
1 x Pulley | $13.30 |
1 x PULLEY HTD TIMING, 3MM PITCH | $22.55 |
1 x 6" Wall Mount Literature Holder | $89.50 |
1 x Removable Strap Clip | $15.95 |
1 x Onyx HD7500 Horizontal Wire, Comb & Spiral Coil Punch Machine | $6,179.00 |
1 x PCB ASSFTY A/CUTTER INTERRUPTE | $28.76 |
1 x SIDE SLITTER ASSY 5031TS | $104.76 |
1 x TAPER BUSHING BORE 1-5/8 1610 | $55.60 |
1 x DF 915 Paper Folder DISCONTINUED | $4,500.00 |
1 x PTOPIC 520 INFRARED HEATER AS | $379.05 |
1 x 1" CORE BUSHING 19MM, E105 63340001 | $59.16 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Yellow "T" Silicone Cords | $39.15 |
1 x BLOCK WEAR PAD | $9.77 |
2 x HR 3800 Slitter Assembly | $598.00 |
1 x SHIM RING (PACMASTER | $79.58 |
1 x DISCONTINUED SET SCREW, 1/4-20 X 1 | $21.32 |
1 x Zippy Cutter | $9.95 |
1 x WRAPPER, HOIST C-CHANNEL | $551.18 |
1 x Seypa S 87 Cutting Knife | $648.00 |
1 x Switching Power Supply/=95K-80470 | $454.05 |
1 x Roll Laminator Cleaning Kit | $62.95 |