|
The Versalam-2700 P does it all: single or double sided laminating, with all film up to 10 mil, and mounting too. It's a great soultion for all of your laminating needs up to 27" wide.
The heated rollers give great results even when laminating difficult materials. The adjustments for temperature, speed, and pressure allow you to use most laminating films at their optimum settings.
Max. Laminate Thickness: | 3/16" Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 4.4 feet/minute |
Slitters: | No |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 110 V, 60 Hz, 1600 W |
Size: | 23-1/2" x 51" x 26-1/2" |
Shipping Weight: | 158 Pounds |
![]() Seybold 35 1/2" Dynaclamp Cutting $551.00 |
![]() Scoring Blade for Acrylic $25.00 |
![]() Polar 115 S Cutting Knife $642.00 |
![]() Polar 90 CE Cutting Knife $440.00 |
![]() WirePro Advantage E $1,849.00 |
1 x A6972265 Position Roller - Genuine Ricoh Part | $23.76 |
1 x NONSTK-SPACER-RD ZINC 1/4 X #8 X 1/4 | $22.55 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x Hand Held Hollow Drill Bit Sharpener | $65.95 |
1 x 11/16" I.D. Black Plastic Snap Rings | $9.25 |
1 x Scoring Blade for Acrylic | $25.00 |
1 x NONSTK-SPACER-RD ALUM 5/8 X 1/4 X 1/4 | $43.93 |
1 x 2 Year Worry Free Guarantee (b) | $59.99 |
1 x GBC Catena 65 Hot & Cold 25" Roll Laminator | $4,095.00 |
1 x BQ-P60 Perfect Binding System | $6,795.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x Clip | $7.63 |
1 x Yellow "T" Silicone Cords | $39.15 |
1 x BELT M013854-13 DISCONTINUED | $1,657.24 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x REWDR TENSION BOLT 632501775 | $57.56 |
1 x TENSION CONTROL FRONT BLOCK | $143.68 |
1 x Tungsten Carbide Glass Cutting Wheel for 63" Excalibur Series | $18.00 |
1 x Versalam-2700 EP Roll Laminator | $3,699.00 |
1 x TSL-2700 27" School Laminator | $1,495.00 |
1 x 36" Extended Measuring Arm for the Sabre Series Cutters | $162.00 |
1 x 62361 36" Stand for 40” Sabre Series 2 | $553.50 |
1 x GUARD, TENSIONER REAR IDLER | $201.50 |
1 x Finisher Parts - Lower Entrance Guide - Genuine Ricoh Part | $33.96 |
1 x Count Complete Perfing Assembly | $299.85 |
1 x STRAP - JOG | $206.52 |
1 x Stahl 135A Top Right Cutting Knife | $354.00 |
1 x 140T 3MM HTD BELT | $48.48 |