|
The Versalam-2700 HC is a heavy-duty metal construction laminator suitable for any use from schools to commercial printi shops. It does one or two sided lamination, cold lamination, and mounting. The Versalam-2700 HC uses heated silicone rollers for crystal-clear laminating on all materials.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5 feet/minute |
Slitters: | One |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 1/4" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 24" x 51" x 27" |
Shipping Weight: | 158 Pounds |
![]() OD4300 Coil Inserter $0.00 |
![]() Plastic NX Snaprail™ $49.95 |
![]() 1/2" Baum/Nygreen Dahly Hollow $31.49 |
![]() FD 320 Paper Folder $1,329.00 |
YOKE $0.00 |
1 x BORE 5MM 10T PULLEY | $101.62 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 2.25 IDX.25D RNDBELT | $11.41 |
1 x Horizon PC-20 (5 Hole) Cutting Knife | $348.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x CONVEYOR BELT | $36.12 |
1 x TORQUE WASHER, TUMBLE | $14.67 |
1 x EBA 10/710 Cutting Knife | $431.00 |
1 x SPRING NUT | $7.80 |
1 x TABLE END PANEL | $217.90 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x PS-10 Rotary Crash Numbering Machine | $16,950.00 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x 7/8" I.D. Black Plastic Snap Rings | $12.49 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x 1" Push-to-Lock Loop Screws | $21.95 |
1 x MBM Triumph 5255 20 3/8 inch Fully Automatic Paper Cutter | $14,359.00 |
1 x DU BUSHING FLANGE 0808 | $22.55 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x Versalam-2700 P Roll Laminator | $2,999.00 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x 85 series dust collector | $28.95 |
1 x Aluminum Snap Rail End Cap | $66.00 |