|
The Versalam-2700 HC is a heavy-duty metal construction laminator suitable for any use from schools to commercial printi shops. It does one or two sided lamination, cold lamination, and mounting. The Versalam-2700 HC uses heated silicone rollers for crystal-clear laminating on all materials.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5 feet/minute |
Slitters: | One |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 1/4" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 24" x 51" x 27" |
Shipping Weight: | 158 Pounds |
![]() 11/32" Lawson / Miller HFD / Baum $29.79 |
![]() Big Bench Xtra for 64" Javelin $774.00 |
![]() Utility Blades $38.43 |
![]() 25"x250' 10 mil Digikote Gloss $327.00 |
![]() Vertical Graphik Blade Holder $90.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BRSHLSS DC GEARMOT >USE 1722899 | $7,641.97 |
1 x Paper Sensor Unit/DF-755 | $49.48 |
1 x BEARING 5210-031 | $22.10 |
1 x HEAT SWITCH #27-800PL(USI#3211 | $81.40 |
1 x Big Bench Xtra for 44" Javelin Xtra & Series 2 | $744.00 |
1 x Metal Loop Hangers | $59.50 |
1 x PTOPIC FILM SHAFT BRAKE BLOCK | $83.59 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x Phoenix 2700-DHP Dual Heat Laminator — Production Model | $2,549.00 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x Digital 60 Wide Format Laminator | $18,999.00 |
1 x 32" I Bar Shrink Wrap Sealer | $449.00 |
1 x Camco Big 3 Top Side (12") Cutter Knife | $156.00 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x DRIVE BELT | $16.70 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x 14" I-Bar Shrink Wrap Sealer | $355.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x LEVER | $25.65 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x PLASTIC INSERT F/D00R | $10.66 |
1 x TCC 2700 27" Roll Laminator | $1,625.00 |
1 x GUIDE BRACKET LEFT-DISCONTINUED | $48.44 |
1 x NONSTK-KEY 1/8 SQUAREX 5/8 LONG | $22.55 |
1 x GAGE, SMC G46-10-02-M-C | $64.49 |
1 x CONTACT BLOCK NC E-1839-8 | $220.73 |
1 x SPEED CONTROL BOARD E1651 | $585.49 |
1 x 442 Premium Roller Trimmer | $339.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x Wohlenberg 115 Cutting Sticks | $122.00 |
1 x Wohlenberg 115 Cutting Sticks
This product has been added to your cart.
For more information, click on the Cart button at the top of the page.