|
The Versalam-2700 EP does everything the 2700 P does and does it faster. It does single or double sided laminating, with all film up to 10 mil, and mounting too. It is designed for production laminating of all materials up to 27" wide.
The heated rollers give great results even when laminating difficult materials. The adjustments for temperature, speed, and pressure allow you to use most laminating films at their optimum settings.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 1/4" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 23-1/2" x 51" x 26-1/2" |
Shipping Weight: | 158 Pounds |
PL-1200HP 12 in. High Performance $2,895.00 |
TCC-1400i 14" Roll Laminator $1,014.00 |
GBC Locking Laminator Cabinet $859.00 |
6 inch Plastic Loop Straps $9.95 |
GBC CombBind C75 Plastic Comb $199.95 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |