|
The Versalam-2700 EP does everything the 2700 P does and does it faster. It does single or double sided laminating, with all film up to 10 mil, and mounting too. It is designed for production laminating of all materials up to 27" wide.
The heated rollers give great results even when laminating difficult materials. The adjustments for temperature, speed, and pressure allow you to use most laminating films at their optimum settings.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 1/4" |
Speed Control: | Variable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 23-1/2" x 51" x 26-1/2" |
Shipping Weight: | 158 Pounds |
![]() WirePro 301 EPC 3:1 Heavy Duty $499.00 |
![]() Onyx APES-14 Automatic Paper $3,799.00 |
![]() Perfmaster Sprint Perforating and $6,599.00 |
![]() CoilPro 301 EPI Electric Coil $714.95 |
![]() RAF-11 Fully Automatic $0.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x CoilPro 201i Heavy Duty Plastic Coil Punch & Electric Inserter | $399.00 |
1 x Challenge 193 (10 hole) Cutting Knife | $198.00 |
1 x Passport Die Cutter | $105.00 |
1 x ROLL PIN, 3/32 X 5/8 | $21.09 |
1 x Challenge 37TCM Cutting Knife | $416.00 |
1 x IGLIDE CLIP BEARING | $7.35 |
1 x CAP12 UF 400 V 047680013 | $55.65 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Shelf Push Pins | $49.50 |
1 x VBF 135A Top Front Cutting Knife | $354.00 |
1 x FORM CHUTE TOP | $73.38 |
1 x ID Photo Die Cutter | $289.00 |
1 x ANVIL F/AUTOBOOKLETMAKER | $49.62 |
1 x Triumph 4305 Manual Paper Cutter | $2,496.00 |
1 x DIN7991 HEX SOCKET H | $10.01 |
1 x Removable Strap Clip | $15.95 |
1 x 1/4 HAIRPIN CLIP | $4.10 |
1 x PCB 115 V | $410.01 |
1 x D842 16-7/8" Heavy Duty Manual Paper Cutter | $1,279.00 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x DISCONTINUED ROD,NIP GUIDE | $266.40 |
1 x Spring handle | $21.03 |
1 x Book Clamps | $39.95 |
1 x IDLER, SIDE GUIDE BELT | $1,014.01 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x ASY TOP GUIDE | $69.30 |
1 x Sprint 3000 Booklet Maker | $8,599.00 |
1 x M/PUNCH LOCKING COLLAR DEALER | $10.03 |
1 x BookletMac Booklet Maker | $2,069.00 |
1 x 20002255018 ADJ ARM | $29.86 |
1 x DISCONTINUED PLATE, UPPER STACKER | $344.76 |
1 x Binding Workstation | $219.00 |