|
The Versalam 1300 is a heavy duty 13" wide laminator capable of both double and single sided lamination and mounting up to 1/4 inch. It uses heated rollers for high quality laminating, even with difficult materials.
The Versalam 1300 will laminate with any film from 1.5 mil up to 10 mil. Its features and simpliciry of use make it ideal for both school and business use.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 13 inches inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 4 feet/minute |
Slitters: | Yes |
Core Size(s): | 1", 3" |
Temp. Control: | Adjustable |
Laminate/Mount Thickness: | 10 mil / 1/4 inch |
Speed Control: | Adjustable |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz |
Size: | 34" H x 24" W x 18" D |
Shipping Weight: | 114 Pounds |
OD4300 Coil Inserter $0.00 |
Xyron MDL403-300 $0.00 |
Finisher 6300 Roll Laminator $0.00 |
Excalibur 1000X Utility Cutter $2,466.00 |
Kutrimmer 1038 14 3/4" Paper $579.00 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-LED PCB ASSY | $21.83 |
1 x ROLLER SUPPORTER SPRING | $20.05 |
1 x NONSTK-UPPER MEMBRANE END CAP-RH | $17.55 |
1 x POTENTIOMETER F/352SA - NLA | $171.67 |
1 x BELT, F/INFEED TRANSPORT DISCONTINUED | $234.55 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x POLY FLEX BELT, IB.#22824 | $73.74 |
1 x PL244WF 44" Wide Format Roll / Mounting Laminator | $4,999.00 |
1 x PUNCHING KNIFE SGMT.IB#2559029 | $50.35 |
1 x SNAP SWITCH | $38.19 |
1 x 22.5" Knife Guard | $45.00 |
1 x Phoenix 44" Wide Format Mounting Laminator | $7,095.00 |
1 x Model 140 Stock Truck DISCONTINUED | $510.00 |
1 x SLIDE F PRE-REGULAT.IB#2558310 | $21.45 |
1 x 21" Knife Guard | $42.00 |
1 x NONSTK-BASE GL-4 | $47.35 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x KEY SHORT | $44.94 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x LJ-6 Paper Jogger | $1,265.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x Micro Switch (VX-52-1A3)/DC615,645 | $29.96 |
1 x Clutch Spring | $11.14 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x Hoerauf 135A Top Right Cutting Knife | $354.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |