|
The Tamerica TCC-655Q 25" roll laminator can easily laminate everything from small documents to large posters. This two sided laminator is appropriate for schools, businesses, and copy and print shops.
Max. Laminate Thickness: | 20 mil Mills |
Max. Laminate Width: | 25" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 5.5 feet/minute |
Slitters: | No |
Core Size(s): | 1" |
Temp. Control: | Variable |
Laminate/Mount Thickness: | 3/16" |
Speed Control: | Variable |
Reverse Switch: | No |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz |
Size: | 11.2" x 34.8" x 17.7" |
Shipping Weight: | 84 Pounds |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-LED PCB ASSY | $21.83 |
1 x ROLLER SUPPORTER SPRING | $20.05 |
1 x NONSTK-UPPER MEMBRANE END CAP-RH | $17.55 |
1 x POTENTIOMETER F/352SA - NLA | $171.67 |
1 x BELT, F/INFEED TRANSPORT DISCONTINUED | $234.55 |
1 x Omni 532 Top Front Cutting Knife | $186.00 |
1 x POLY FLEX BELT, IB.#22824 | $73.74 |
1 x PL244WF 44" Wide Format Roll / Mounting Laminator | $4,999.00 |
1 x PUNCHING KNIFE SGMT.IB#2559029 | $50.35 |
1 x SNAP SWITCH | $38.19 |
1 x 22.5" Knife Guard | $45.00 |
1 x Phoenix 44" Wide Format Mounting Laminator | $7,095.00 |
1 x Model 140 Stock Truck DISCONTINUED | $510.00 |
1 x SLIDE F PRE-REGULAT.IB#2558310 | $21.45 |
1 x 21" Knife Guard | $42.00 |
1 x NONSTK-BASE GL-4 | $47.35 |
1 x 3/4" Loose Leaf Rings | $17.85 |
1 x KEY SHORT | $44.94 |
1 x BLANK DEFLECTOR BRKT | $20.06 |
1 x Heavy Duty Hand Slot Punch with Guide | $69.95 |
1 x LJ-6 Paper Jogger | $1,265.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 122-TOOTH DRIVE GEAR | $194.58 |
1 x Micro Switch (VX-52-1A3)/DC615,645 | $29.96 |
1 x Clutch Spring | $11.14 |
1 x Onyx HD7700H Ultima Heavy Duty Electric Hole Punch for Comb, Wire, & Coil | $4,840.00 |
1 x Hoerauf 135A Top Right Cutting Knife | $354.00 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |