|
The TCC 2700XM 27" heated roller laminator can laminate and mount your documents in a single pass. It can laminate up to 10 mil film, single or double sided. The four heated rollers apply even heat to safely laminate all documents, including photos and digital prints. The TCC 2700XM features all metal construction and digital electronic controls for long life and ease of use.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 27" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 ft./min. feet/minute |
Slitters: | Two |
Core Size(s): | 1" |
Temp. Control: | Electronic variable |
Laminate/Mount Thickness: | 0.25" |
Speed Control: | Electronic variable |
Reverse Switch: | Yes |
Warranty: | One year warranty |
Power: | 120 V, 60 Hz, 1600 W |
Size: | 30.5" x 17.7" x 14.2" |
Shipping Weight: | 110 Pounds |
7/8" Aluminum Screw Posts $7.35 |
![]() Onyx HD7500 Horizontal Wire, Comb $6,179.00 |
![]() PL-1200HP 12 in. High Performance $2,895.00 |
![]() GBC Catena 65 Hot & Cold 25" Roll $4,095.00 |
![]() CombMac-24E Electric Comb Binding $1,395.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x Leveling Feet for 660 Cutter. | $23.63 |
1 x Office Duty Manual Corner Rounding Machine | $169.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x Caps | $64.46 |
1 x Pilot Light | $17.96 |
1 x SQUARE KEY 1/8 SQ X | $29.11 |
1 x Collar/DC-745 | $32.28 |
1 x Lassco Spinnit FMM-3 Three Spindle Paper Drill | $8,250.00 |
1 x 3/8" SB-35 Bostitch type staples | $7.49 |
1 x Martin Yale 376B Cutting Knife | $119.00 |
1 x 15/16" SB-35 Bostitch type staples | $9.49 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x NONSTK-SCREW,#3 X 8 | $20.44 |
1 x D846 Heavy Duty Manual Paper Cutter | $1,779.00 |
1 x PH1250M 12.5" Manual Stack Cutter | $395.00 |
1 x DISCONTNUED Lassco Spinnit FMMP-3 Three Spindle Paper Drill | $5,299.00 |
1 x Idler | $15.73 |
1 x TBD - TRU-ARC RETAINER RIN | $23.68 |
1 x 12" x 500' 1.7 Mil Low Melt Laminating Roll Film | $64.52 |
1 x Glue Scraper Plate/DB-280 | $76.82 |