|
The TCC-1400i is a 14" professional grade roll laminator for volume laminating of documents less than 14" wide. This heated roller laminator is capable of laminating up to 10mil in thickness and mounting up to 3/16" board.
The TCC-1400i is capable of laminating all films form 1.5mil to 10mil. It is a user friendly and versatile laminating solution for both schools and businesses.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 14" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 ft/min feet/minute |
Slitters: | 2 |
Core Size(s): | 1" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 3/16” |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz |
Size: | 34" x 24" x 18" |
Shipping Weight: | 60 Pounds |
![]() GBC Locking Laminator Cabinet $859.00 |
![]() 6 inch Plastic Loop Straps $9.95 |
![]() GBC CombBind C75 Plastic Comb $199.95 |
![]() FC114 Frankencreaser Digital $11,607.00 |
![]() Onyx PAL-M Picks-A-Lift Manual $959.00 |
1 x NX Snap Rail End Cap | $39.50 |
1 x SPACER, BEARING | $22.10 |
1 x FP1(B) Mega Duty Hole Punch | $219.00 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x Campeador S72SAP Cutter Knife | $420.00 |
1 x Wire Unit/AF-100 | $32.37 |
1 x PH1250A 12.5" Automatic Stack Cutter | $899.00 |
1 x MBM Triumph 6660 Programmable Automatic Stack Cutter | $19,599.00 |
1 x Snap-apart Spiral Sign Holder | $139.50 |
1 x SHAFT, CORE, ORCA IV | $3,253.19 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x ADJUSTMENT BOLT | $59.11 |
1 x Staples (12 Cartridges)/DBM100/120 | $259.20 |
1 x Photo Interrupter-Back Jogger Section | $31.05 |
1 x BLOCK WEAR PAD | $9.77 |
1 x Model 139 Stock Truck DISCONTINUED | $620.00 |
1 x 16" Knife Guard | $32.00 |
1 x Flat Belt/AF-100 | $45.41 |
1 x 13.5" Knife Guard | $27.00 |
1 x 12" Knife Guard | $24.00 |
1 x SWITCH BAR | $36.49 |
1 x Big Bench Xtra for 64" Javelin Xtra & Series 2 | $774.00 |
1 x Triumph 3905 Cutting Knife | $228.00 |
1 x ASY SOLDER CTR. RECTIFIER | $60.58 |
1 x BUSINESS CARS (10 MI | $90.92 |
1 x Snap-In UPC Data Rail | $30.95 |
1 x 14.5" Knife Guard | $29.00 |
1 x 24" Knife Guard | $48.00 |
1 x Model 126 Stock Truck DISCONTINUED | $500.00 |
1 x 19" Knife Guard | $38.00 |
1 x NONSTK-ELBOW MALE SWIVEL1/4 TO 1/8NPT | $60.78 |
2 x Triumph 3900 Cutting Knife | $456.00 |
1 x 22" Knife Guard | $44.00 |
1 x SPTWLD GEAR GUARD | $99.20 |
1 x FEED ROLLER RUBBER | $46.80 |
1 x 21" Knife Guard | $42.00 |
1 x Proteus Workbench For 64" Javelin Integra | $607.50 |
1 x 22.5" Knife Guard | $45.00 |
1 x 9/16" I.D. Clear Plastic Snap Rings | $13.66 |
1 x Zippy Cutter | $9.95 |
1 x Roll Laminator Cleaning Kit | $62.95 |