|
The TCC-1400i is a 14" professional grade roll laminator for volume laminating of documents less than 14" wide. This heated roller laminator is capable of laminating up to 10mil in thickness and mounting up to 3/16" board.
The TCC-1400i is capable of laminating all films form 1.5mil to 10mil. It is a user friendly and versatile laminating solution for both schools and businesses.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 14" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 ft/min feet/minute |
Slitters: | 2 |
Core Size(s): | 1" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 3/16” |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz |
Size: | 34" x 24" x 18" |
Shipping Weight: | 60 Pounds |
5/16" Iram / Sterling Long Drill $36.95 |
Challenge 265 Cutting Sticks $56.49 |
Polar 145 Cutting Sticks $108.49 |
MBM/Ideal Trimuph 4215 Cutting $129.95 |
MBM/Ideal Trimuph 4225 Cutting $129.95 |
1 x BORE 5MM 10T PULLEY | $101.62 |
1 x Ideal/MBM 408A Automatic Folder | $4,900.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 2.25 IDX.25D RNDBELT | $11.41 |
1 x Horizon PC-20 (5 Hole) Cutting Knife | $348.00 |
1 x 62354 Stand, Waste Catcher & Roll Feeder Package for 60” Sabre Series 2 | $1,295.00 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x CONVEYOR BELT | $36.12 |
1 x TORQUE WASHER, TUMBLE | $14.67 |
1 x EBA 10/710 Cutting Knife | $431.00 |
1 x SPRING NUT | $7.80 |
1 x TABLE END PANEL | $217.90 |
1 x 62356 Stand, Waste Catcher & Roll Feeder Package for 80” Sabre Series 2 | $1,425.00 |
1 x PS-10 Rotary Crash Numbering Machine | $16,950.00 |
1 x TCC-1400i 14" Roll Laminator | $1,014.00 |
1 x 3/16" Push-to-Lock Loop Screws | $19.25 |
1 x 7/8" I.D. Black Plastic Snap Rings | $12.49 |
1 x BACKGAUGE CLAMP #4655 | $65.36 |
1 x 1" Push-to-Lock Loop Screws | $21.95 |
1 x MBM Triumph 5255 20 3/8 inch Fully Automatic Paper Cutter | $14,359.00 |
1 x DU BUSHING FLANGE 0808 | $22.55 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x Versalam-2700 P Roll Laminator | $2,999.00 |
1 x Versalam-1300 13" Roll Laminator | $2,599.00 |
1 x 85 series dust collector | $28.95 |
1 x Aluminum Snap Rail End Cap | $66.00 |
1 x 7/8" I.D. Clear Plastic Snap Rings | $12.49 |
1 x Wohlenberg 115 Cutting Sticks | $122.00 |