|
The TCC-1400i is a 14" professional grade roll laminator for volume laminating of documents less than 14" wide. This heated roller laminator is capable of laminating up to 10mil in thickness and mounting up to 3/16" board.
The TCC-1400i is capable of laminating all films form 1.5mil to 10mil. It is a user friendly and versatile laminating solution for both schools and businesses.
Max. Laminate Thickness: | 10 mil Mills |
Max. Laminate Width: | 14" inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 8.8 ft/min feet/minute |
Slitters: | 2 |
Core Size(s): | 1" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 3/16” |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 V, 60 Hz |
Size: | 34" x 24" x 18" |
Shipping Weight: | 60 Pounds |
![]() Minikote EZ 27" Roll Laminator $1,398.00 |
![]() 7/32" Seybold Standard Drill Bit $32.95 |
![]() 1/8" Seybold Standard Drill Bit $32.95 |
![]() Foam Spacer Blocks $462.00 |
![]() Velcro® Tape $61.00 |
1 x ALLUM EXTR ESSEX | $79.44 |
1 x Separator/AF-100, DC-645 | $23.96 |
1 x FEED BELT | $44.36 |
1 x Menu 5 Mil Laminating Pouch Boards | $48.95 |
1 x 20" Knife Guard | $40.00 |
1 x 14" Knife Guard | $28.00 |
1 x 5/8X3/4XRL CDS | $26.15 |
1 x 24" I Bar Shrink Wrap Sealer | $409.00 |
1 x ASY CLUTCH GEAR | $39.39 |
1 x 22.5" Knife Guard | $45.00 |
1 x SWITCH 9002 393 DISCONTINUED | $55.79 |
1 x 3/8" Solid Brass Screw Posts (100 Sets) | $68.47 |
1 x Versalam-2700 HC Roll Laminator | $3,999.00 |
1 x T/S & FORM BASE | $377.00 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x Lightweight 6" Wall Mount Literature Holder | $23.50 |
1 x SPRING EXT 7/16X.037X1-1/4 | $23.68 |
1 x WIRE, 14 GA, BLACK | $20.69 |
1 x C900 coin bagging attachment | $78.95 |
1 x 6" Countertop Literature Holder | $119.50 |
1 x Versalam-2700 P Roll Laminator | $2,999.00 |
1 x WATER HEATER, 230V (DOMESTIC) | $10,837.19 |