|
The Phoenix 27” Production Model is a smart choice for production environments looking for an economical, easy to use unit. The tabletop design is great for smaller working areas.
Designed to offer maximum flexibility, the unit allows the use of either 1” or 2-1/4” core laminating films in thicknesses of 1.5 mil to 10.0 mil. The unit can also be gapped incrementally at settings of 1/16”, 1/8”, 3/16” and 1/4” to accomplish mounting on a large variety of substrates.
With safety and energy savings concerns in mind, the Phoenix 2700 includes the latest innovations. Safety measures include safety latches on the feed tray and a safety shield preventing the unit from running if they are not in place. To conserve energy, the machine will drop into a sleep mode (175 ̊) if unit has been idle for 1/2 hour. If there is no activity on the unit for 3 hours, the heaters turn off.
Max. Laminate Thickness: | 10 Mills |
Max. Laminate Width: | 27 inches |
Heat Source: | 2 Heated Rollers |
Max. Laminating Speed: | 10 feet/minute |
Core Size(s): | 1" and 2-1/2" |
Temp. Control: | Yes |
Laminate/Mount Thickness: | 0.25" |
Speed Control: | Yes |
Reverse Switch: | Yes |
Warranty: | 1 Year |
Power: | 120 VAC, 60 Hz, 1600 W, 13.3 A |
Size: | 36.5”W x 16”H x 18”D |
Shipping Weight: | 135 Pounds |
![]() Phoenix 2700-DH Dual Heat $1,405.00 |
![]() Versalam-2700 HC Roll Laminator $3,999.00 |
![]() Producto Pad Padding Press $439.00 |
![]() Pad About Padding Press $599.00 |
![]() HF200 Simplimatic Paper Folder $899.00 |
1 x Onyx HD7000 Comb, Wire, & Spiral Plastic Coil Punching Machine | $3,604.00 |
1 x VersaBind-Ei Electric Punch and Binding Machine | $2,399.00 |
1 x Onyx PAL-M Picks-A-Lift Manual Module | $959.00 |
1 x 12" x 250' 3 Mil Low Melt Laminating Roll Film | $39.30 |
1 x PH1850M 18.5" Heavy Duty Manual Stack Cutter | $1,995.00 |
1 x Ideal Triumph 3905 Cutting Knife | $228.00 |
1 x Onyx OD4012 Heavy Duty Electric Interchangeable Die Punch | $2,574.00 |
1 x ONYX HD8370 Insert-A-Bind Wire Inserter/Closer | $1,729.00 |
1 x WirePro 101 3:1 Wire Punch & Bind Machine | $189.00 |
1 x TOP LT BAR SPRT | $15.58 |
1 x Pillar | $6.08 |
1 x BEARING, FLANGE FC-SCM-204 | $932.30 |
1 x 25" x 500' 1.7 Mil Low Melt Laminating Roll Film | $134.34 |
1 x DC Motor Assy/DP-U Series | $159.35 |
1 x 1162 BOARD BLADE | $66.80 |
1 x FLAT BELTS N4-K1021-01 | $54.28 |
1 x Lassco Spinnit FM-2 | $3,235.00 |
1 x 3/8" Hollow Drill Bit for FP-60 | $39.95 |
1 x 29000255015 ADJ DISC | $87.65 |
1 x 4-armed Mobile Hanger | $4.50 |
1 x Harris 532 Top Side Cutting Knife | $134.00 |
1 x NONSTK-GREASE TRAY | $1,583.44 |
1 x THUMB SCREW H-6955-508 | $21.87 |
1 x SHIM, 3.0MM, WITH FLAT | $474.06 |
1 x Harris 532 Top Front Cutting Knife | $186.00 |
1 x LATCH, SPRING | $68.08 |
1 x Vertical Graphik Blade Holder | $90.00 |
1 x 3/16" Hollow Drill Bit for FP-60 | $39.95 |
1 x NONSTK-#3 E.RING | $20.44 |
1 x FP60-LS High Capacity Paper Drill | $1,549.00 |
1 x ACTUATOR 11A-21260 | $22.10 |
1 x CAP 20 UF 400 V 047680017 | $68.26 |
1 x FLAT BELT 11C-40020 | $197.19 |
1 x Martin Yale W24 24" Paper Cutting Machine | $334.99 |
1 x NONSTK-TARGET, FILM DIA. | $209.72 |
1 x GEARED MOTOR 147510052 | $2,815.29 |
1 x Wohlenberg 42" Pacemaker II Cutting Knife | $582.00 |
1 x Suction Cup with Deko Spring | $85.49 |
1 x 1/4" Hollow Drill Bit for FP-60 | $39.95 |
1 x MK7 230VAC JUMPER WIRE | $45.60 |
1 x DIE ASSY (7 PUNCH) | $374.55 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x Plastic Luggage Strap | $19.95 |
1 x Heavy Duty Hand Slot Punch | $59.95 |